4416P-2-101 Resistors

Number of Pins:	16
Height - Seated (Max):	0.114" (2.90mm)
Size / Dimension:	0.410" L x 0.295" W (10.41mm x 7.50mm)
Supplier Device Package:	16-SOL
Package / Case:	16-SOIC (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	160mW
Series:	4400P
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	15
Tolerance:	±2%
Resistance (Ohms):	100
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

When it comes to RF resistive applications, choosing the right network or array is critical to the performance of the system. The 4416P-2-101 Resistor Network / Array is a popular choice for a variety of applications, ranging from wireless communications to RF energy management and RF signal routing. In this article, we will discuss the application fields and working principles of the 4416P-2-101 Resistor Network / Array. The 4416P-2-101 Resistor Network / Array is a four-resistor network designed to serve as an impedance matching network. This network is ideal for a range of applications including providing power to the antenna, preventing RF power from entering other parts of the device, and preventing unintentional transmission of RF signals. This network also has the ability to downconvert or upconvert the signal in order to properly match the impedance of the load. The 4416P-2-101 Resistor Network / Array consists of four resistors connected in parallel. Each resistor has a specific value and its resistance is measured in Ohms. The value of the resistors can be adjusted to match the input and output impedances of the system, allowing the network to operate at its maximum efficiency. The 4416P-2-101 Resistor Network / Array can be used in a variety of applications, such as wireless power management, cable shielding, and antenna matching. In wireless power management, the network is able to provide the necessary impedance matching for the RF power to be properly transferred to the load. In cable shielding, the network helps to prevent any interference between two cables. Lastly, the network can provide the necessary impedance matching for the antenna, which helps to ensure optimal signal reception. The 4416P-2-101 Resistor Network / Array utilises two different types of technology to achieve its desired results, including Ohm’s Law and capacitance. Ohm’s Law states that the current in a circuit is equal to the voltage divided by the resistance. This law is used to determine the amount of current flowing through each resistor in the network. The capacitance is used to establish the value of a single resistor in the network. The capacitance of each resistor is specifically designed to ensure its corresponding value is accurate. The 4416P-2-101 Resistor Network / Array is a reliable and cost-effective component for a variety of RF resistive applications. This network is easy to use and can provide the necessary impedance matching for a variety of systems. By utilising Ohm’s Law and capacitive elements, this network is able to provide the necessary impedance matching for a variety of applications, ranging from wireless power management to antenna matching.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description