Allicdata Part #: | 4416P-T01-102-ND |
Manufacturer Part#: |
4416P-T01-102 |
Price: | $ 0.36 |
Product Category: | Resistors |
Manufacturer: | Bourns Inc. |
Short Description: | RES ARRAY 8 RES 1K OHM 16SOIC |
More Detail: | 1k Ohm ±2% 160mW Power Per Element Isolated 8 Resi... |
DataSheet: | 4416P-T01-102 Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.32704 |
Specifications
Number of Pins: | 16 |
Height - Seated (Max): | 0.114" (2.90mm) |
Size / Dimension: | 0.410" L x 0.295" W (10.41mm x 7.50mm) |
Supplier Device Package: | 16-SOL |
Package / Case: | 16-SOIC (0.295", 7.50mm Width) |
Mounting Type: | Surface Mount |
Applications: | -- |
Operating Temperature: | -55°C ~ 125°C |
Temperature Coefficient: | ±100ppm/°C |
Power Per Element: | 160mW |
Series: | 4400P |
Resistor-Ratio-Drift: | 50 ppm/°C |
Resistor Matching Ratio: | -- |
Number of Resistors: | 8 |
Tolerance: | ±2% |
Resistance (Ohms): | 1k |
Circuit Type: | Isolated |
Part Status: | Active |
Packaging: | Tube |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor Networks, Arrays
Resistor networks and arrays are an important class of electronic components that are used in a wide variety of applications. The 4416P-T01-102 is an example of a resistor network that is used in various applications. This resistor network is widely used in a variety of signal conditioning and fan-out circuits where a single signal needs to be routed to several outputs.The 4416P-T01-102 resistor network consists of four resistors. Each resistor has an individual terminal that can be connected separately to the circuit board. The resistors are connected in parallel. This arrangement allows for a greater current carrying capacity than if they were connected in series. The network also serves to provide a low impedance path between the inputs and outputs.The total resistance of the 4416P-T01-102 resistor network depends on the values of the individual resistors. For example, if each resistor has a resistance of 470 ohms, then the total resistance will be approximately 94 ohms. The total resistance can also be changed by adjusting the resistance of each resistor. For example, if three of the resistors have a resistance of 470 ohms and the fourth has a resistance of 560 ohms, then the total resistance of the network will be approximately 116 ohms.This network can be used for a variety of applications including signal conditioning, voltage and current sensing, as well as fan-out applications. The resistor network can be configured to suit the specific requirements of any particular application. For example, it can be used to buffer an input signal or to divide it and route it to multiple outputs. It can also be used to attenuate a signal, to increase or decrease its amplitude, or to reject unwanted signals.In signal conditioning applications, the 4416P-T01-102 resistor network can be used to isolate the input signal from the output. This ensures that the output signal does not affect the input signal and it also prevents any interference between the two. The resistor network can also be used to reduce crosstalk between two or more signals. It can also be used to filter out noise and unwanted signals.In voltage and current sensing applications, the resistor network can be used to measure the voltage or current at a particular point in a circuit. This is particularly useful when monitoring the voltage or current of a particular device or component. For example, it can be used to measure the voltage or current at the input or output of a power supply or an amplifier.In fan-out applications, the 4416P-T01-102 resistor network can be used to divide a single signal and route it to multiple outputs. This can be particularly useful for power distribution in systems that require multiple power levels. It can also be used to transfer data between multiple devices or components, allowing for higher system performance.The 4416P-T01-102 resistor network is a versatile component that can be used in a variety of applications. It is easy to configure and modify to suit any specific requirements and can provide a variety of benefits, such as increased current carrying capacity, improved signal isolation, and improved noise and crosstalk reduction. It is an invaluable component for a wide range of electronic applications.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "4416" Included word is 40
Part Number | Manufacturer | Price | Quantity | Description |
---|
138-4416-007 | Cinch Connec... | 9.83 $ | 1000 | CONN N PLUG STR 50 OHM CR... |
138-4416-107 | Cinch Connec... | 22.87 $ | 1000 | CONN N PLUG R/A 50 OHM SO... |
4416M | ebm-papst In... | 46.65 $ | 24 | FAN AXIAL 36VDC 119X38MM |
4416 | Pomona Elect... | 0.0 $ | 1000 | REPLACEMENT COVER "E" ALU... |
4416B-1"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLACK 1"X... |
4416W-1"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED WHITE 1"X... |
4416B-1.5"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLK 1 1/2... |
4416B-1/2"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLK 1/2"X... |
4416B-1/4"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLK 1/4"X... |
4416B-2"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLACK 2"X... |
4416B-3/4"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLK 3/4"X... |
4416B-3/8"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED BLK 3/8"X... |
4416W-1.5"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED WHT 1 1/2... |
4416W-1/2"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED WHT 1/2"X... |
4416W-1/4"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED WHT 1/4"X... |
4416W-3/4"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED WHT 3/4"X... |
4416W-3/8"X36YD | 3M | 0.0 $ | 1000 | TAPE DBL COATED WHT 3/8"X... |
12X12-6-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 12"... |
1-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 1"X... |
1/2-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 1/2... |
2-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 2"X... |
3-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 3"X... |
3/4-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 3/4... |
12X12-6-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 12"... |
1-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 1"X... |
1/2-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 1/2... |
2-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 2"X... |
3-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 3"X... |
3/4-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 3/4... |
12-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 12"... |
12-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 12"... |
6-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 6"X... |
6-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 6"X... |
4-5-4416B | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED BLACK 4"X... |
4-5-4416W | 3M (TC) | 0.0 $ | 1000 | TAPE DBL COATED WHITE 4"X... |
4416P-T02-203 | Bourns Inc. | 0.36 $ | 1000 | RES ARRAY 15 RES 20K OHM ... |
4416P-T01-100 | Bourns Inc. | 0.36 $ | 1000 | RES ARRAY 8 RES 10 OHM 16... |
4416P-T01-101 | Bourns Inc. | 0.36 $ | 1000 | RES ARRAY 8 RES 100 OHM 1... |
4416P-T01-102 | Bourns Inc. | 0.36 $ | 1000 | RES ARRAY 8 RES 1K OHM 16... |
4416P-T01-102LF | Bourns Inc. | 0.36 $ | 1000 | RES ARRAY 8 RES 1K OHM 16... |
Latest Products
RT2465B7TR13
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RT2427B6TR13
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
CRC3A4E390JT
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
CRB2A4E430JT
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
CRB2A4E121JT
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
CRB1A2E301JT
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...