4420.0609 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices used in electrical appliances that are designed to prevent overloads from occurring. The 4420.0609 is a specific model of circuit breaker that is designed to handle up to 25 amps of current under both single and three-phase operation. It is a two-pole breaker with a terminal capacity for up to four wires.

The 4420.0609 circuit breaker offers high temperature stability, low leakage current, and maximum voltage ratings up to 400 volts. It is equipped with a thermal-magnetic trip which is designed to trip the circuit when a current overload occurs. This trip is triggered when the current exceeds the breaker\'s current rating.

The 4420.0609 is designed for use in residential and commercial applications. It is commonly used in applications ranging from HVAC systems to wiring circuits. In these applications, the breaker is usually wired in series with the load, and when the current exceeds its rating the breaker trips, protecting both the wiring and the equipment it is connected to. It also features a manual reset button which allows the breaker to be reset if needed.

The 4420.0609 circuit breaker is also designed to provide short circuit protection. In the event of a short circuit, the breaker will trip immediately, thereby preventing further damage to the equipment and wiring. The breaker is also designed with a voltage induced trip which will trip the breaker if the voltage exceeds a certain threshold. This trip helps to protect against electrical fires caused by excessive voltage.

The 4420.0609 is designed to be mounted to a standard DIN rail. It comes with two mounting screws and an upper and lower guide to help ensure proper installation. Once mounted, the breaker requires a specified minimum current to be connected to the input before the breaker can be reset. Once the current exceeds this minimum, the trip is triggered.

In summary, the 4420.0609 is a two-pole circuit breaker designed for residential and commercial applications. It is equipped with a thermal-magnetic trip which trips the circuit when a current overload occurs, and a voltage induced trip which trips the breaker if the voltage exceeds a certain threshold. The breaker is designed to be mounted to a standard DIN rail, and requires a specified minimum current before it can be reset.

The specific data is subject to PDF, and the above content is for reference