4420P-T01-105

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are amongst the oldest electronic components used in electrical engineering. Although they have little function beyond connecting two points of a circuit, they are essential components in modern electrical and electronic technology. Resistor networks and arrays are used in a variety of applications, ranging from power distribution, protection and signal conditioning, to the implementation of complex circuits and logic functions.

The 4420P-T01-105 is a resistor network array that is commonly used for signal conditioning and filtering in industrial, automotive, and consumer electronics applications. This particular network consists of two parallel branches on a double-sided, four-legged part, which is commonly referred to as a 4-layer or 2-branch configuration. The 4-layer configuration allows for greater efficiency due to the reduced lead count, smaller size, and the ability to reduce the overall part count needed for the application. The 4420P-T01-105 contains a total of fifteen resistors, with individual resistors ranging from 10Ω to 500Ω.

The 4420P-T01-105 array can be used in a variety of applications, such as signal conditioning, filtering, and attenuation. In signal conditioning applications, the array is used to condition a signal, such as from a PLC, for further processing in a microcontroller. The array is also used to filter signals, such as audio or video signals, in order to reduce noise or interference. Additionally, the 4420P-T01-105 can be used to attenuate or reduce the magnitude of electrical signals, such as in current sensing or voltage regulation circuits.

The 4420P-T01-105 network operates on the principle of equivalent resistance, where the total resistance of the network equals the sum of the individual resistances. In this particular network, the two parallel branches are tied together via a common bus, resulting in the 4-layer or 2-branch configuration. The total resistance of the network is determined by the sum of the individual resistors’ values. For example, if one branch is composed of three resistors of 10Ω, 20Ω, and 30Ω, respectively, and the other branch is composed of two resistors of 10Ω and 10Ω, then the total resistance of the network will be equal to 30Ω.

Aside from resistance, the 4420P-T01-105 array can also provide other functions for the application. Each resistor in the network can be used as a voltage divider, which can be helpful in providing a regulated voltage. Additionally, the array can also be used as an impedance matching circuit in order to adjust the impedance of signals sent and received through different parts of the circuit.

The 4420P-T01-105 resistor network is an important component in a variety of industrial, automotive, and consumer applications. It is used for signal conditioning, filtering, attenuation, voltage regulation, and impedance matching. By using the principle of equivalent resistance, the 4420P-T01-105 can provide the necessary electrical properties for a variety of applications.

The specific data is subject to PDF, and the above content is for reference