4420P-T01-122

Number of Pins:	20
Height - Seated (Max):	0.114" (2.90mm)
Size / Dimension:	0.510" L x 0.295" W (12.95mm x 7.50mm)
Supplier Device Package:	20-SOL
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	160mW
Series:	4400P
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	10
Tolerance:	±2%
Resistance (Ohms):	1.2k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are electronic components that are used to control the electrical current in a circuit. The 4420P-T01-122 is one such component, and is used in many different applications. The 4420P-T01-122 consists of two distinct parts, a substrate and a resistor array. The substrate is generally made up of an insulating material, such as silicone or glass. The resistor array is comprised of resistors that are mounted onto the substrate. These resistors are connected in either a serial or parallel configuration, depending on the application. In many applications, the 4420P-T01-122 is used as a voltage divider. When used in this capacity, the resistors are connected in a series configuration so that the voltage can be divided among them. This is typically done to regulate the amount of current that flows through the circuit, or to provide different voltage levels for different components of the circuit. The 4420P-T01-122 is also commonly used as an analog-to-digital converter. When used in this capacity, the resistors are connected in an array. A voltage is then applied to one end of the array, while the other end of the array is connected to an analog-to-digital converter (ADC). This allows the ADC to convert the analog signal into a digital signal, which can then be processed by a computer or other device. The 4420P-T01-122 can also be used as an amplifier. In this application, the resistors are connected in a feedback configuration. This means that the output signal is a function of the input signal as well as the resistance value of the resistors. The feedback configuration allows the amplifier to amplify the input signal without distortion.The 4420P-T01-122 can also be used as a switch. In this application, two or more of the resistors are connected in a series configuration. A voltage is applied to one end of the series, while the other end is connected to a single point. When the voltage is high enough, it causes the resistors to switch the current from one point to another. This can be used to control the direction and amount of current in a circuit. The 4420P-T01-122 can also be used to provide protection against short circuits. In this application, two or more resistors are connected in parallel. This allows for the circuit to be protected in the event of a short circuit, as the equal resistance of the resistors reduces the amount of current that flows through the circuit, protecting the circuit from damage. Finally, the 4420P-T01-122 can also be used in radio frequency (RF) applications. In this application, the resistors are used as part of an antenna array. This array helps to amplify the RF signal, and can be used for both receiving and transmitting RF signals.In conclusion, the 4420P-T01-122 is a versatile component that can be used in a variety of applications. Its ability to control the electrical current, divide voltages, convert analog signals to digital signals, amplify signals, switch currents, and provide protection against short circuits make it a valuable component in many different types of circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description