4430.004 Circuit Protection

Series:	TA45
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Thermal
Current Rating:	2A
Voltage Rating - AC:	240V
Voltage Rating - DC:	60V
Number of Poles:	2
Actuator Type:	Pushbutton
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are a protective device that is designed to prevent short circuits or other power system problems from resulting in electrical fires or damage. The 4430.004 is a type of circuit breaker designed to provide protection against both overloads and short circuits.The 4430.004 is designed to be installed in residential, commercial, and industrial power systems. It is typically placed near the main meter box of a building and is designed to detect and respond to dangerous levels of current or voltage in the wiring system. When too much current or voltage is detected in the wiring, the 4430.004 will trip, or disconnect the power to the circuit in order to protect it from damaging itself and any devices or wires that may be attached to it.The 4430.004 is designed to work in two different ways, depending on the type of overload or short circuit detected. When it detects an overload, it will trip the circuit after a period of time and then reset itself once the circuit has cooled off. This allows the 4430.004 to prevent excessive levels of current in the circuit without needing to be manually reset. When a short circuit is detected, the 4430.004 will trip the circuit immediately and will not reset itself until the fault has been cleared and the circuit has been reset by an engineer.The 4430.004 is designed to be an efficient and reliable way of protecting sensitive circuits from damage. It is often used in commercial or industrial settings, where there may be a large number of electrical appliances or components connected to a single circuit. By using a 4430.004, the circuit is protected against both overloads and short circuits, ensuring that any damage is minimized and that the power system remains operational.In terms of installation, the 4430.004 is relatively easy to install, and is often connected to the electrical system of the building using a series of wires and clamps. The 4430.004 is also designed to be mounted to a wall or other suitable mounting surface, so that it is conveniently located near the meterbox, or other components of the building’s electrical system.The 4430.004 is an important part of any power system, as it not only provides protection against potential power surges, but also helps to maintain the integrity of the system, and ensure that it remains operational at all times. In summary, the 4430.004 is a reliable, efficient, and economical way of protecting sensitive electrical components from damage caused by overloads and short circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description