45-CBSA-1.5X3.0X0.4

Series:	40-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.400" (10.16mm)
Length - Overall:	3.000" (76.20mm)
Width - Overall:	1.500" (38.10mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields have been around since the early days of radio technology. The aim of RF Shields is to block unwanted radiation from entering or leaving an electrical device. In the case of 45-CBSA-1.5X3.0X0.4 applications, the RF shield is used to reduce interference in the frequency range between 8M and 14M Hz.The 45-CBSA-1.5X3.0X0.4 is a type of RF shield designed to reduce interference when operating in the 8M-14M frequency range. It is typically used in device applications such as base station antennas, consumer electronic products, and medical equipment. This type of RF Shield consists of aluminum, tin, and steel layers that are applied in three different orientations to optimize the radiation reduction in this frequency range.The working principle behind the 45-CBSA-1.5X3.0X0.4 RF shield is to isolate RF in two different ways. The first is to absorb energy, and the second is to reflect the energy. The aluminum layers in the 45-CBSA-1.5X3.0X0.4 absorb energy in the 8M-14M frequency range and reduce interference. The tin and steel layers of the 45-CBSA-1.5X3.0X0.4 RF shield reflect any incoming energy in the 8M-14M frequency range, creating a barrier and effectively reducing interference.The 45-CBSA-1.5X3.0X0.4 RF shield is designed to reduce interference and provide better signal strength in the 8M-14M frequency range. The combination of the aluminum, tin, and steel layers allows for the effective limitation of unwanted interference from entering or leaving the device. The RF shield also provides a better level of protection from electromagnetic interference in the environment.In the application of RF Shielding, the 45-CBSA-1.5X3.0X0.4 is used due to its unique combination of materials, orientation, and layers. The aluminum, tin, and steel layers allow for a higher level of protection in the 8M-14M frequency range, while providing a low cost alternative to traditional RF shields. This shield can also be used in applications which require shielding in other frequency ranges.In conclusion, the 45-CBSA-1.5X3.0X0.4 RF shield is an essential tool in the application of RF Shielding. By isolating unwanted radiation through absorption and reflection, the 45-CBSA-1.5X3.0X0.4 RF Shield can be used to reduce interference and improve signal strength in the 8M-14M frequency range. Additionally, this shield can also be used in other frequency ranges and provides a low-cost alternative to other types of RF shields.

The specific data is subject to PDF, and the above content is for reference