Allicdata Part #: | 450-0037-ND |
Manufacturer Part#: |
450-0037 |
Price: | $ 14.77 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird - Wireless & Thermal Systems |
Short Description: | RF TXRX MOD BLUETOOTH/WIFI U.FL |
More Detail: | N/A |
DataSheet: | 450-0037 Datasheet/PDF |
Quantity: | 646 |
1 +: | $ 13.42530 |
50 +: | $ 12.86780 |
100 +: | $ 12.31030 |
Serial Interfaces: | SDIO, UART |
Package / Case: | 52-SMD Module |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Current - Transmitting: | 43mA ~ 270mA |
Current - Receiving: | 41mA ~ 100mA |
Voltage - Supply: | 3 V ~ 4.8 V |
Memory Size: | -- |
Utilized IC / Part: | WL1271 |
Antenna Type: | Not Included, U.FL |
Series: | TiWi-R2 |
Sensitivity: | -97dBm |
Power - Output: | 18.3dBm |
Data Rate: | 65Mbps |
Frequency: | 2.4GHz |
Modulation: | CCK, GFSK, OFDM |
Protocol: | 802.11b/g/n, Bluetooth v2.1 + EDR, Class 1.5 |
RF Family/Standard: | Bluetooth, WiFi |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 450-0037 RF Transceiver Module is a fully integrated transceiver package. It allows for the transmission of data over a wide range of frequencies. The module has two chips – the transmitter and the receiver.
The transmitter chip is responsible for converting the input signal into a radio frequency (RF) signal. This is done by using a voltage-controlled oscillator (VCO) in the transmitter. The signal is then amplified and sent out via an antenna.
The receiver chip is responsible for receiving and decoding the RF signal. It contains a voltage-controlled oscillator (VCO) and a filter. The filter is used to eliminate noise and interference from the signal. The signal is then demodulated and sent to the output. The module also contains an error detection and correction block which enables the receiver to detect errors in the communication between the transmitter and receiver.
The 450-0037 RF transceiver module is mainly used in wireless applications such as Bluetooth, Wi-Fi, or Zigbee. It provides a cost-effective solution for short range wireless communication. The module can operate in both the 2.4 GHz and 5.8 GHz. It has a range of up to 50 feet (15 m) and a data rate of up to 1 Mbps.
The 450-0037 RF transceiver module also has a number of features that make it attractive in applications such as industrial and military applications. It is designed to operate in hostile environments and has a low power consumption. It also has a higher level of security than other wireless solutions. It also supports packet switching which allows for higher data rates to be achieved.
To summarize, the 450-0037 RF transceiver module is an ideal solution for short range wireless communication. Its low power consumption, high security features, and packet switching capabilities make it an ideal choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
2.4GHz transceiver, 64MHz Arm Cortex M4F...
ENET-ZBP113 ZIGBEE MODULE
RF TXRX MODULE ISM>1GHZ U.FL ANT
RF TXRX MOD BLUETOOTH/WIFI U.FL
RF TXRX MOD CELLULAR/NAV U.FL
RF TXRX MODULE ISM ...