Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

A coaxial connector, sometimes referred to as an RF connector, is a type of electrical connector commonly used in electronic equipment to link two sections of coaxial cable. Coaxial connectors are most commonly found in audio/visual electronics, telecommunications, aerospace, and military applications. In the case of 456-218SC application field and working principle, such a connector is used in radio frequency (RF) applications and performs by electrically connecting an RF device with an antenna, cable, transceiver, transponder, or any other type of signal source.The most commonly used RF connectors are the 456-218SC. This type of connector is typically designed with male and female ends that are connected via a screw-on threading mechanism. The male end of the connector features a rounded pin with a locking nut that slides onto the female end and locks into place. This ensures a secure connection between the two devices. When connected properly, the 456-218SC connector provides a highly reliable connection with low signal loss.When connected to an RF device, the 456-218SC connector will allow the device to transmit and receive signals within its listed frequency range. This type of connector is designed to operate in both the HF (high frequency) and VHF (very high frequency) ranges, typically up to 500 MHz. It is important to note that depending on the application, the frequency range and performance may vary.The 456-218SC connector is designed for durability and is able to withstand extreme temperatures and environments. It has a thick plastic casing and reinforced contacts that keep it safe and secure even in harsh conditions. The screw-on locking mechanism also ensures that the connection is secure and does not easily become loose or disconnected.In terms of installation, the 456-218SC connector is relatively easy to assemble and requires no special tools, just a standard Phillips screwdriver. First, the male and female ends of the connector are aligned and connected via the locking nut and screws. Then, the contacts are pushed into the female end of the connector until they secure into place. The cable can then be plugged into the male end and tightened down. The connector is now ready for use.In conclusion, the 456-218SC coaxial connector is an ideal choice for radio frequency applications as it is designed for durability and provides reliable and secure connections with minimal signal loss. It is designed to operate in both the HF and VHF ranges and is easy to install, requiring just a standard Phillips screwdriver.

The specific data is subject to PDF, and the above content is for reference