4606H-101-101LF

Number of Pins:	6
Height - Seated (Max):	0.350" (8.89mm)
Size / Dimension:	0.598" L x 0.098" W (15.19mm x 2.49mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	300mW
Series:	4600H
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	5
Tolerance:	±2%
Resistance (Ohms):	100
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 4606H-101-101LF is a high-performance, cost-effective chip resistor network designed for a wide range of applications, from audio processing to medical imaging to automotive sensor networks. Its low-impedance and high-speed operation combined with low noise generation make it ideal for high-performance, sensitive applications. The 4606H-101-101LF consists of 12 individual resistors. Each one is made up of a metal thin film resistor with a laser trimmed resistance value and a low power Schottky diode. The resistors are connected in a network topology in which four resistors are connected in series with a junction point at the center. This network of resistors operates to divide the voltage applied to it into two halves. The network has wide applications in the audio, medical, and automotive industries. In audio applications, the 4606H-101-101LF is used to accurately equalize the levels between each channel. In medical applications, it is used to accurately measure and image electrical signals in the body, such as ECG or EEG. In vehicle applications, the network is used to accurately detect and convert signals from sensors in automotive subsystems, such as ABS or airbags.The 4606H-101-101LF works on the principle of passive division of voltage. The chip is comprised of 12 resistors, which are arranged in a bridge configuration. Each of the four resistors is connected in series with one other resistor, and the junction points of each series are connected to the same common terminals. The 12 resistors are arranged such that they form two parallel paths; one from the input terminals to the output terminals, and the other from the output terminals to the input terminals.When a voltage is applied to the input terminals, the 12 resistors divide the total voltage by half and the sum of the voltages at the two output terminals will be equal to the applied voltage. The voltage divider process is passive, meaning it does not consume power and does not require active elements such as transistors or diodes.The 4606H-101-101LF also has a built-in low power Schottky diode. The diode provides protection from reverse voltage and ensures a high-degree of accuracy in the voltage division process. It also protects against misrouted wiring should there be an error during the installation process. The 4606H-101-101LF provides excellent accuracy and stability over a wide range of temperatures, making it suitable for high temperature environments. It is also designed for low noise operation, making it ideal for applications requiring low-noise operation. The device is offered in a small 8-pin MDP package, making it well suited for space-constrained applications. To summarize, the 4606H-101-101LF is a low-cost, low-impedance solution that is ideal for high-performance, sensitive applications. It is a chip resistor network that is designed to create a passive voltage divider. It has a low-power Schottky diode for reverse voltage protection and excellent accuracy and stability over a wide temperature range. It is also designed for low-noise operation, making it suitable for sensitive applications. The small 8-pin MDP package makes it ideal for space constrained applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description