4610M-902-103LF

capacitor networks, Arrays

The 4610M-902-103LF is a type of capacitor array designed for small-signal, general-purpose use in consumer and industrial appliances. This component has two terminals and is designed to act as a bridge between a higher-voltage circuit and a lower-voltage circuit, or two circuits of different polarities. The component also offers protection from transients in the environment, such as voltage spikes or electrical noise. In this way, the component acts as an active filter component, providing isolation and blocking, while still allowing energy to flow between the circuits.

Application Field

The 4610M-902-103LF is most often used in consumer and industrial devices as part of an engineering/prototype system. This component can be used in a variety of electrical and electronic applications, such as: Transient voltage suppression (TVS) circuits, overvoltage protection and short-circuit protection, noise reduction and interference filtering, wave shaping, DC and AC switching, and signal bypassing.

Working Principle

The component consists of two bipolar capacitors placed in series. These capacitors provide a capacitive reactance that is equal and opposite between the two terminals, allowing for the component to act as an active filter. The component also has two impedance elements in series with the capacitors. These elements act as dampening resistors, allowing the component to absorb transients and reduce electrical noise.

In operation, the component works by blocking direct current (DC) voltages and allowing alternating current (AC) voltages to pass. When voltage is applied to the capacitor array, the capacitors act as a bridge between the two voltages, while the impedance elements act as resistors and reduce the electrical noise.

The component works by reacting to changes in the environment and providing protection to the cells and devices connected to the component. By blocking direct current, it prevents excessive levels of energy from passing through the component and damaging the cells. At the same time, the component also reduces electrical noise, protecting the cells from interference.

Conclusion

The 4610M-902-103LF capacitor array is designed for small-signal, general-purpose use in consumer and industrial appliances. It has two terminals and acts as an active filter component, providing isolation and blocking, while still allowing energy to flow between the circuits. The capacitor array is most often used in consumer and industrial devices as part of an engineering/prototype system. It is suitable for a variety of electrical and electronic applications, such as TVS circuits, overvoltage protection and short-circuit protection, noise reduction, interference filtering, wave shaping, DC and AC switching, and signal bypassing.