Resistor Networks, Arrays

The 4611X-101-154LF is a frequency division multiplexer designed for use in a wide range of applications. Manufactured by Murata Electronics, this type of multiplexer has a very low voltage drop and can be used in applications where space is limited. Its construction consists of a single etched ceramic micro-strip which is laid on top of a thick-film resistor network.

This multiplexer operates on the principle of frequency division multiplexing, which allows for multiple signals to be multiplexed onto the same frequency. Frequency division multiplexing works by passing the multiple signals over a single line, each signal taking up one-half of the frequency. As the multiple signals make their way through the carrier wave, each signal receives a certain amount of energy, with the highest energy taking up the highest frequency.

The 4611X-101-154LF multiplexer uses a resistor network to divide the energy of each signal. This network contains four resistors: two each placed between the output terminals and the ground. As the current passes through the four resistors, they each divide up the energy, resulting in each signal receiving a different amount of energy. By using this type of resistor network, signals with two or more frequencies can be multiplexed onto the same channel.

In addition to its ability to multiplex multiple signals, the 4611X-101-154LF multiplexer can also isolate signals from each other. This is achieved by placing an additional resistor between the positive and negative terminals. The additional resistor prevents the signals from interfering with each other, resulting in a higher level of signal isolation.

The 4611X-101-154LF multiplexer also features a frequency response of up to 10kHz, making it great for high-speed applications. With its frequency response, the multiplexer can multiplex signals that are up to 18kHz away. This makes the multiplexer suitable for use in applications such as audio recording, radio broadcast, and satellite communications, among others.

The 4611X-101-154LF multiplexer is also designed with a low power consumption. This means that it can be used in applications where reliability is of the utmost importance, such as in medical equipment. With its low power consumption, the 4611X-101-154LF multiplexer is able to maintain a good level of signal integrity over long periods of time.

The 4611X-101-154LF multiplexer is a great addition to any circuit. Its ability to multiplex multiple signals onto the same channel, as well as providing a high level of signal integrity, make it ideal for use in a wide variety of applications. Whether it’s used in audio recording, radio broadcast, satellite communications, or any other application, the 4611X-101-154LF multiplexer is sure to deliver superior results.