46W-NKB2-NWO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel indicators, pilot lights, and the 46W-NKB2-NWO are all common items found in modern industrial settings. The 46W-NKB2-NWO is a class of switch that provides an indication to the user that a switch is in the on position or the off position, with a single LED providing the required illumination. The 46W-NKB2-NWO is activated by means of a momentary switch, and when the switch is activated, a low voltage current is applied to the LED, providing the required illumination.

This type of switch is commonly used when larger traditional switches are not available or when a discreet switch is needed. The 46W-NKB2-NWO is usually wired in series with a higher voltage switch, such as a relay switch, so that when the relay switch is activated, the 46W-NKB2-NWO LED is illuminated, indicating that the switch is in the ‘on’ position. Other applications involve using the 46W-NKB2-NWO as a stand-alone switch, powering the LED from an independent source, or in place of a traditional toggle switch. The LED is usually of the green variety, but can be red, or even yellow to indicate different conditions.

The principle of operation for the 46W-NKB2-NWO is simple. The switch itself is a momentary contact switch, which closes when the button is activated. This closes the circuit, allowing the current to flow through to the LED and to illuminate it.

The current that is provided to the LED is usually a low voltage current, such as 5 volts. This is enough to ensure that the LED is illuminated properly, without causing any damage to the LED or module. The LED is typically mounted in a bezel, which is designed to protect the LED from mechanical damage. The bezel is also designed to enhance the visual effect of the LED, providing a brighter and more consistent light.

The 46W-NKB2-NWO is widely used in industrial settings and can be used to indicate the status of large equipment. By providing an indication to the user that a switch is in the on position, they can work with confidence knowing that the equipment is ready to use. Because the switch is usually wired in series with a higher voltage switch, the user can easily determine the status of the equipment without fear of the LED being damaged by the higher voltage.

The 46W-NKB2-NWO is a reliable and effective switch for a wide range of applications, and is a welcome addition to any industrial panel. It is easily installed and will provide many years of reliable use. It is also a cost-effective solution, providing long-term savings over traditional panel indicators, pilot lights, and other switching devices.

The specific data is subject to PDF, and the above content is for reference