Allicdata Part #: | 48-CBSA-1.25X4.25X0.4-ND |
Manufacturer Part#: |
48-CBSA-1.25X4.25X0.4 |
Price: | $ 15.34 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 48 SERIES CBS SHIELD ASSEMBLY |
More Detail: | RF Shield Shield, 2-Piece 1.250" (31.75mm) X 4.250... |
DataSheet: | 48-CBSA-1.25X4.25X0.4 Datasheet/PDF |
Quantity: | 1000 |
21 +: | $ 13.95090 |
Series: | 40-CBS |
Packaging: | Bulk |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.400" (10.16mm) |
Length - Overall: | 4.250" (107.95mm) |
Width - Overall: | 1.250" (31.75mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields, also known radio frequency shields, are tools used to protect electronic components and circuits from external electromagnetic energy that can interfere with the circuit\'s signal or cause it to short out and malfunction. By blocking out external RF signals and providing a low-impedance electrical path to ground, shields allow electronics to operate safely in a wide range of environments. The 48-CBSA-1.25X4.25X0.4 is a particular type of RF shield that can be used in a variety of applications and offers superior performance in terms of shielding effectiveness.
The 48-CBSA-1.25X4.25X0.4 is a rectangular, single-layer, stamped-metal shielding envelope made from continuous Nickel-plated Copper wire. It is typically available in a range of sizes from 17mm to 125mm and comes in three standard thicknesses, 0.3mm, 0.5mm, and 0.7mm. The shielding effectiveness of this type of shield is typically around 40dB at 10GHz in the X-band frequency range, which is considered good for the application of shielding of wireless devices and power cables.
The 48-CBSA-1.25X4.25X0.4 can be used in a variety of RF applications, including shielding radio frequencies (RFs) from interference and attenuation. It is ideal for applications where the ability to attenuate RF energy is critical, such as in the protection of sensitive equipment, such as medical and scientific instrumentation, and where EMI (electromagnetic interference) protection is a critical requirement. It is also used in applications where the shield needs to block extremely low frequency (ELF) and very high frequency (VHF) radiation.
The working principle of the 48-CBSA-1.25X4.25X0.4 involves two components: a continuous Nickel-plated Copper wire and a grounding clip. The grounding clip is connected to the rear of the shield via a pair of screws and provides a continuous low-impedance electrical path to the shield\'s grounding plane. The combination of the continuous wire and the grounding clip creates an enclosure that blocks out undesirable electromagnetic radiation, while the low-impedance path to ground provides a continual sink for any electromagnetic energy that manages to penetrate the shield.
The 48-CBSA-1.25X4.25X0.4 is used in a variety of applications and provides superior shielding effectiveness when compared to other types of RF shields. It is also lightweight and easy to install, making it ideal for use in a variety of applications. From the protection of sensitive instrumentation to reducing radio frequency interference and attenuation in electronic equipment, the 48-CBSA-1.25X4.25X0.4 is a versatile and reliable RF shield that can help ensure the efficient operation of electronics in a wide range of environments.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...