480-10-228-00-001101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors: Headers, Specialty Pin

480-10-228-00-001101 is a rectangular connector in this category, used for joining two or more wires or cables together. Such connectors usually have two types, standard headers and specialty pins, with varying sizes and shapes. Depending on the model, the number of pins may vary. The name "480-10-228-00-001101" is derived from the 3 digits proportion, for example, the "4" specifies the 4.0mm pitch, the "8" the 8.2mm length, the "0" the 6.0mm width.
It is widely used in a variety of applications, from networking to audio-visual systems. Used in low-power devices, it is usually used as a type of connector. In higher power devices, it is used for isolating wires from other components or circuits. The same connector can also be used to maintain power-to-ground isolation.
In general, these connectors have two parts: the header, which goes over the device, and the pin, which is inserted into the wire to connect the two components together. The pins are usually held in place by a top-sliding lock. When the part is in use, electricity passes from the header to the pin. Alternatively, the header can have two settings – an open configuration and a closed configuration. This allows more flexibility in terms of cable routing. In addition, the header provides mechanical protection to the pins.

Generally speaking, the working principle of 480-10-228-00-001101 is relatively simple. In the closed configuration, electricity flows from the header to the pin, while in the open configuration, electricity is prevented from passing between the two components. Thus, the two components can be separated without risking a short circuit or other electrical failure.

In addition, this connector is also very reliable and easy to assemble. It consists of a number of contact elements, each with an identification number for easy identification. The contacts are held together by a plastic material or a metal bar. The assembly takes less than a minute, and no special tools are required, making it a great choice for any application.

Generally speaking, 480-10-228-00-001101 is a versatile rectangular connector, used in a variety of applications ranging from networking to audio-visual systems. Its reliable design and easy assembly make it an ideal choice for any application, while its two settings provide more flexibility when routing cables. As such, it is an ideal solution for a variety of needs.

The specific data is subject to PDF, and the above content is for reference