4816P-T02-202LF

Number of Pins:	16
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.440" L x 0.220" W (11.18mm x 5.59mm)
Supplier Device Package:	16-SOM
Package / Case:	16-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	80mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	15
Tolerance:	±2%
Resistance (Ohms):	2k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Founded in 1968, resistors networks, arrays, also known as resistor ladders, are a type of analog component used primarily to measure and control electric current. The 4816P-T02-202LF resistor network (hereinafter referred to as “the network”) is a 4-pin lead device that features extremely compact construction. It is designed mainly to increase the operational reliability of automotive systems and enhance their diagnostic capability. In the network, resistors and pins are arranged in an interlinked series, with each component connected in parallel for better performance. This arrangement allows the resistance of the entire network, or one individual pin, to be adjusted easily and accurately.Working PrincipleThe operation of the 4816P-T02-202LF network follows the same principle that applies to all resistor networks. A voltage is applied to the input terminal of the network, causing a current to flow through the various paths it creates. Through this current flow, the impedance of the network is regulated. In essence, the network provides good signal quality while limiting the amount of power used in the process.ApplicationsThe 4816P-T02-202LF network has a variety of applications in automotive systems. In general, automotive systems require reliable, stable, and precise measurements. The network meets all of these requirements.The network can be used for speed sensing and control, as well as voltage control. It is ideal for use in ignition systems, fuel injection, and various other automotive functions where precision and control are necessary.The network can also be used as a voltage-sensing resistor for fuel injection systems, spark discharge, and other in-vehicle electronics. Because of its compact design, it is well-suited for on-board ECU installation.In addition, the network is suitable for use in hybrid systems, where the AC voltage is used as a reference for DC applications.ConclusionThe 4816P-T02-202LF resistor network provides a reliable, stable, and precise way to measure and control in-vehicle electric current. Its design features an interconnected series of resistors and pins, allowing the impedance of the individual components or the entire network to be adjusted accurately. It can be used in various automotive functions, such as speed sensing and control, as well as voltage control. In addition, the network can be applied to on-board electric control units, as well as hybrid systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description