482-G212-K1M1-F3S1-25A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are a power safety device that protect an electrical circuit from damage caused by an excessive current flow, short circuit, or overload. The circuit breaker is designed to automatically trip when it detects an unsafe condition. The482-G212-K1M1-F3S1-25A is one such device.

When installing, it is important to make sure that the breaker is the appropriate type and size for the circuit. It should be mounted to a wall or other acceptable surface that can handle the current and any vibration associated with the breaker. Once installed, the482-G212-K1M1-F3S1-25A is designed to protect specific circuits from overcurrent and overvoltage situations. In these situations, the breaker will trip or reset itself, which in turn will interrupt the flow of electricity to the circuit.

The most common application for the482-G212-K1M1-F3S1-25A is residential and commercial settings. It is often installed in circuit breaker panels located near the main power supply. These panels typically contain several other types of breakers that are designed to trip in case of an emergency situation such as a power surge. This breaker is also used in industrial and manufacturing settings to protect motors and other equipment from damage due to excess current.

The working principle of the 482-G212-K1M1-F3S1-25A is simple. When an excessive current, short circuit, or overload is detected, the breaker trips, interrupting the flow of electricity. This causes a switchblade inside the breaker to cut the electric circuit. This in turns shuts off the power in the circuit and prevents further damage.

The breaker can be configured to trip at different levels depending on the type and size of the circuit. Generally, the higher the voltage, the higher the current threshold must be before the breaker trips. For most residential and commercial size systems, the breaker will trip within a millisecond of detecting an excessive current. This provides a quick response time and protects the circuit from harm.

In addition to overcurrent and overvoltage protection, the 482-G212-K1M1-F3S1-25A is also designed to protect against arcing faults and ground faults. Arcing faults occur when the electric arc jumps from one point to another, creating a high voltage spike as it travels. A ground fault occurs when one of the wires in a circuit shorts to ground, creating a large current. Both of these situations can cause serious damage to the circuit, but can be prevented if the 482-G212-K1M1-F3S1-25A is properly installed and configured.

The 482-G212-K1M1-F3S1-25A circuit breaker is a reliable and cost-effective solution for overvoltage and overcurrent protection. It is designed to provide a quick response time and has the ability to protect against a variety of electrical hazards. By installing this breaker in the correct locations, it can help ensure the safety of any electrical system.

The specific data is subject to PDF, and the above content is for reference