4820P-1-330

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are widely used in many fields. The 4820P-1-330 is no exception. This network consists of ten separate resistors, each with an individual resistance value of 330 ohms, and is designed for use in audio applications.

The 4820P-1-330 is a particularly well-suited resistor network for use in audio applications. It is designed to provide impedance matching, allowing signals to pass from one system component to the next with minimal distortion. Its ten 330-ohm resistors can be connected in a variety of ways to achieve different levels of impedance. With its compact size and low profile, the 4820P-1-330 takes up minimal space while providing excellent audio performance.

The working principle of the 4820P-1-330 is simple but effective. Each of the ten 330-ohm resistors can be connected in series, or in parallel to create a wide range of different impedances. When connected in series, the total impedance of the network is equal to the sum of the individual resistor values, so in the case of the 4820P-1-330 this would be 330 × 10, or 3300 ohms. When connected in parallel, the total impedance is equal to the inverse of the sum of the inverse of the individual resistor values; in this case, 1/330 + 1/330 + … + 1/330 = 10/330, or 33 ohms.

In addition to impedance matching, the 4820P-1-330 can also be used to create voltage dividers, current limiters, and other filter circuits to condition signals. By connecting the resistors in series or parallel and then tapping off the mid-point, a voltage divider is created which can be used to reduce the amplitude of a signal. Similarly, by connecting two or more resistor networks in series, a current limiter can be created which can protect sensitive components from excessive current draw.

The 4820P-1-330 is a versatile and dependable resistor network. Its simple design makes it easy to use for applications ranging from impedance matching to voltage dividers and other filter circuits. Thanks to its small size and low profile, the 4820P-1-330 can be used in audio applications without taking up too much space. Its ten 330-ohm resistors offer a wide range of impedance levels and the ability to create custom filter circuits to suit any audio application.

The specific data is subject to PDF, and the above content is for reference