4820P-T01-474

Number of Pins:	20
Height - Seated (Max):	0.094" (2.40mm)
Size / Dimension:	0.540" L x 0.220" W (13.72mm x 5.59mm)
Supplier Device Package:	20-SOM
Package / Case:	20-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	160mW
Series:	4800P
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	10
Tolerance:	±2%
Resistance (Ohms):	470k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

4820P-T01-474 is one of the many types of resistor networks available in the market. Resistor networks consist of several resistors connected together to form a single network. This network behaves as a single unit, thus providing functionality not achievable by single resistors. In this article, we will discuss the different applications and working principle of the 4820P-T01-474 resistor network.

Applications

Resistor networks like the 4820P-T01-474 can be used in various applications. They can be used as voltage dividers, current dividers, essential components in filter circuits, and for controlling feedback in amplifiers.Voltage dividers: Resistor networks are commonly used to divide a voltage into two parts. This can be done by connecting the resistor network between the input voltage and ground. The output of the voltage divider can then be used for various purposes, for example it can be used to control the brightness of a LED. Current dividers: Resistor networks can also be used to divide a current into two parts. This can be done by connecting the resistor network in series with a load such as a LED. The network is then used to divide the current passing through the LED into two parts. Filter circuits: Resistor networks can be used in filter circuits. These circuits are used to remove certain frequencies from an AC signal, enabling a specific frequency to pass through the circuit.Amplifier control: Resistor networks can be used in amplifiers to control the gain of the amplifier. The resistor network is connected in such a way that it divides the input signal before it can reach the amplifier. This allows the amplifier to be adjusted to a certain gain before passing the signal.

Working Principle

The 4820P-T01-474 resistor network works on the same principle as all other resistor networks. The basic principle of operation is to divide the power that enters the resistor network into multiple parts. For example, when the 4820P-T01-474 is used as a voltage divider, the input voltage is divided into two parts, with one part passing through each resistor in the network. When used as a current divider, the current entering the resistor network is first divided between the resistors in the network, before being sent to the load. Similarly, when used as a filter circuit, the frequencies that are to be removed are divided between the resistors in such a way that the desired frequencies can pass through the circuit. Finally, when used as an amplifier control, the input signal is divided between the resistors, and the gain of the amplifier is adjusted to the divided signal.

Conclusion

The 4820P-T01-474 resistor network can be used in multiple applications such as voltage dividers, current dividers, filter circuits and amplifier control. Its working principle is based on dividing the input power into multiple parts, thus providing the desired functionality.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description