4820P-T02-391

Resistor Networks, Arrays

The 4820P-T02-391 is a resistor network that is designed for a wide range of applications. This type of resistor is designed to perform a specific task by connecting many small resistors in series or parallel. The combination of the resistors is used to control levels of current, voltages, and power.

Physical Construction

The 4820P-T02-391 is physically constructed from tiny metal or carbon ions that are connected in a top-down configuration. This top-down configuration allows for the resistors to be as small as 0.4mm thick by 12mm wide. The overall size of the 4820P-T02-391 is 1.25mm thick by 8mm wide by 22mm long. This makes the network small, light weight, and easy to work with.

Pin and Terminal Arrangement

The 4820P-T02-391 is arranged in a two-pole, step-down design. There are four resistor pins on each pole for a total of eight pins. The two poles are arranged in parallel which allow for either end to be connected to other devices. The two outside pins connect the resistors to the circuit and the two inner pins allow for the resistors to be connected in series for a more precise resistance level.

Working Principle

The working principle of the 4820P-T02-391 is based on the basic laws of electricity. Electricity flows in closed loops and resistors limit the amount of current that can flow through it. The 4820P-T02-391 uses this principle to limit the amount of current flows through the network. The resistors can also be arranged in series or parallel which allows for higher or lower resistance levels to be achieved. This is useful when precise levels of current, voltage, and power are desired.

Applications

The 4820P-T02-391 is used in a wide variety of applications. These applications include analog/digital circuitry, radio frequency circuits, impedance matching circuits, power supply circuits, and communications circuits. It is also used in many high-end electronics like televisions, cell phones, computers, and other consumer electronics.

Conclusion

The 4820P-T02-391 is a resistor network designed for a wide range of applications. The network is constructed from metal or carbon ions connected in a top-down configuration. Its small size, light weight, and easy to work with characteristics make it one of the most popular resistor networks available. The working principle of the 4820P-T02-391 is based on basic laws of electricity. It is used in many applications including analog/digital circuitry, radio frequency circuits, impedance matching circuits, power supply circuits, and communications circuits.