Allicdata Part #: | 49-CBSF-3.75X7.0X0.4-ND |
Manufacturer Part#: |
49-CBSF-3.75X7.0X0.4 |
Price: | $ 21.42 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 49-CBSF-3.75X7.0X0.4--49S260--CI |
More Detail: | RF Shield Shield, 2-Piece 3.750" (95.25mm) X 7.000... |
DataSheet: | 49-CBSF-3.75X7.0X0.4 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 19.47550 |
Series: | 40-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.400" (10.16mm) |
Length - Overall: | 7.000" (177.80mm) |
Width - Overall: | 3.750" (95.25mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields, a type of electromagnetic shielding, is used to protect against electrical interference or eavesdropping. The most common method of creating a protective shield is to encase an area, or device, in a conductive metal such as copper, steel, or tin. Alternatively, thin films of certain materials can be applied directly to the surface of the shielded area.
RF shields are specially designed in different shapes and dimensions to meet the specific requirements of different applications. For example, 49-CBSF-3.75×7.0×0.4 is a type of RF shield that is commonly used in electronics. It has three dimensions- 3.75 inches (width) by 7.0 inches (length) by 0.4 inches (thickness) and is usually made of cold rolled steel.
These RF shields can be used for a variety of applications, such as cellular phones, cell phone towers, radio antennas, cellular base stations, wireless networks, and two-way radio systems. They are also used in military, aerospace, automotive, and medical applications to protect against electrical interference or eavesdropping.
The working principle of this type of RF shield is based on the Faraday cage principle. This states that any electromagnetic radiation that is incident on the outside of the cage will be completely blocked, reflected, or absorbed by the material that encloses the cage. In other words, when the electromagnetic radiation hits the RF shield, the energy is absorbed and dissipated, thus protecting the device from being damaged or interfered with.
The efficacy of the RF shields is generally determined by the material used and the thickness of the material. For example, for this type of RF shield, the material used is usually cold rolled steel, which is a highly conductive material. The thickness also needs to be appropriate in order to provide effective shielding, as too thick a material will block the radiation and too thin a material will allow the radiation to pass through.
In addition to providing shielding against electromagnetic radiation, RF shields can also be used to control the emissions of certain frequencies. This is done by changing the frequency or power of the signal sent out from the device. By controlling the signal, it makes it difficult for any external devices to detect the signal or any data sent from the shielded device.
RF shields are an essential element in any electronic system or component. It is important to ensure that the right type of RF shield is used for the specific application in order to maximize the effectiveness of the shielding. 49-CBSF-3.75×7.0×0.4 is a type of RF shield that is commonly used for a variety of applications, particularly in the cellular and wireless industry, due to its cost-effectiveness and reliability.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...