4HF106250Z4AACXGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic devices that generate periodic electrical signals, otherwise known as oscillations. Oscillators produce signals with a specific frequency of oscillation, which is determined by the type of oscillator and its particular operating parameters. Oscillators are used in many applications, including radio transmitters, timers, audio amplifiers, voltage regulators, and signal generators. 4HF106250Z4AACXGI8 is an oscillator that is widely used in the electronic world. This article will discuss its application fields and working principle.

The 4HF106250Z4AACXGI8 oscillator operates at a frequency of 10 ~ 6250MHz with a temperature range of -20°C to +85°C. This makes it ideal for a range of applications, such as cell phones, walkie-talkies, surveillance systems, Wi-Fi routers, and short-range radio systems. Its low phase jitter and high linearity also make it suitable for use in high-quality data transmission systems. This oscillator can also be used in smartphones, tablets, and other mobile devices.

The 4HF106250Z4AACXGI8 oscillator has a low power consumption and high frequency stability, making it suitable for use in power supplies and other low-power applications. It is also suitable for performance circuits, such as clock and data recovery systems, which require high-speed frequency accuracy and very low power consumption.

The 4HF106250Z4AACXGI8 oscillator has a low internal noise level, making it suitable for use in self-calibrating gyroscopes and inertial navigation systems. It is also suitable for use in spread spectrum communication systems, due to its low internal noise. In addition, the oscillator has a high level of resilience, meaning it can operate in harsh environments.

The working principle of the 4HF106250Z4AACXGI8 oscillator is based on phase-locked loop (PLL) technology. A phase-locked loop is a system of hardware and software components that act together to produce a periodic signal that is correctly locked in phase and frequency to a reference signal. The oscillator consists of two components, namely the voltage-controlled oscillator (VCO) and the phase/frequency detector (PFD) to lock the output frequency to the reference frequency. The VCO is a type of oscillator that produces an output frequency that is dependent on the amplitude of the control voltage applied. The control voltage is adjusted such that the output frequency of the VCO is locked to the reference frequency. The output of the VCO is then compared to the reference signal in the PFD module. The output of the PFD is then used to adjust the control voltage of the VCO in order to maintain the desired frequency.

In conclusion, the 4HF106250Z4AACXGI8 oscillator is a frequency and phase-stable device with low power consumption, making it suitable for use in a range of applications. Its low internal noise level further enhances its reliability and resilience, making it suitable for performance-critical systems. The oscillator operates using phase-locked loop technology, allowing it to accurately lock the output frequency to the reference signal.

The specific data is subject to PDF, and the above content is for reference