4MA100000Z3AACTGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is essentially a circuit that is designed to generate a continuous waveform, characterized by an output signal that oscillates, or fluctuates, between a high and low output voltage. The periodic output of an oscillator is created by a sequence of actively driven switching intervals alternating over time, in which the signal is switched from a high to a low voltage, and then back again from the low to a high voltage. The 4MA100000Z3AACTGI8 is an example of an oscillator used in a variety of applications - such as robotics, medical, industrial, automotive and consumer electronics.

The 4MA100000Z3AACTGI8 is an active RF oscillator offered in a small, surface-mount package, usually a four-pin SOT23-6. It contains an inductor, a capacitor and one or two transistors as active components. This particular oscillator has a minimum operating voltage of 2.4V and a maximum operating voltage of 5.5V, with a working frequency of between 4 – 100MHz and an output impedance between 50 and 75 ohms, depending on its application. Its main feature is its low power consumption, with an average active current of only 5mA, which makes it highly suitable for battery-powered portable devices.

When the 4MA100000Z3AACTGI8 is operating, the transistor starts conducting, and a standing-wave current of two times the supply current flows through the inductor, in opposite directions. This current starts the oscillation, where the upper and lower sides of the wave are fed by the transistor. This process is called charging and discharging and described by the mathematical phenomena known as the “Harmonic Oscillator”. As the current through the inductor decreases, it charges the capacitor, which adds energy to the oscillation process. Conversely, the capacitor discharges as current passes through the inductor, and the cycle continues.

The 4MA100000Z3AACTGI8 is extremely versatile and is used in a wide range of applications. It can be used as an active mixer element, as well as for amplifying weak signals. It is also used in voltage controlled oscillators for ultrasonic range finding and other range finding purposes. Oscillators such as the 4MA100000Z3AACTGI8 are also widely used in wireless communications, satellite communication systems, radar and navigation systems, and even robots.

In conclusion, the 4MA100000Z3AACTGI8 is an active RF oscillator that is used in a variety of applications. It has a minimum operating voltage of 2.4V and a maximum operating voltage of 5.5V, with a working frequency of between 4 – 100MHz and an output impedance between 50 and 75 ohms. Its low power consumption makes it highly suitable for battery-powered portable devices, and it can be used as an active mixer element, as well as for amplifying weak signals. The 4MA100000Z3AACTGI8 is a versatile and reliable oscillator used extensively in a wide variety of applications from satellite communications and robotics to medical and industrial electronics.

The specific data is subject to PDF, and the above content is for reference