5-1634503-5

Frequency - Max:	4GHz
Insertion Loss:	--
Mating Cycles:	500
Voltage Rating:	500V
Center Contact Material:	Phosphor Bronze
Operating Temperature:	-55°C ~ 85°C
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Plating:	Gold
Body Finish:	Nickel
Body Material:	Zinc Alloy
Includes:	--
Ingress Protection:	--
Housing Color:	Silver
Features:	--
Number of Ports:	1
Series:	ZDC, Greenpar
Fastening Type:	Bayonet Lock
Cable Group:	--
Mounting Feature:	--
Mounting Type:	Through Hole
Impedance:	50 Ohm
Shield Termination:	Solder
Contact Termination:	Solder
Connector Type:	Jack, Female Socket
Connector Style:	BNC
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are commonly used in the transmission of radio frequency signals from one communications device to another. In particular, the 5-1634503-5 Coaxial Connector is an important component in the transfer of high-frequency signals in the RF realm. This article will discuss the application field of this particular type of connector and its working principle.Application FieldThe 5-1634503-5 Coaxial Connector is a radio frequency connector designed for most types of equipment operating in the frequency range of 0-1500MHz, making it ideal for use in antennas, transceivers, radio systems, and communication devices. It is also used to establish a connection between two sources of electronic equipment for data transmission.The 5-1634503-5 Connector is capable of withstanding an operating voltage of 100V, a maximum frequency of 1500MHz and up to 500V of AC rush current. This makes it suitable for both indoor and outdoor applications. Additionally, its various cable types (including RG174, RG58, RG59 and RG62) offer additional flexibility to the user.Working PrincipleThe 5-1634503-5 Coaxial Connector is designed to provide a secure, shielded, and low-loss connection between two pieces of equipment. To achieve this, the connector includes three essential components: an inner conductor, an outer conductor (also known as a shield) and an insulating, or dielectric, material to separate the two.The inner conductor consists of stranded copper wire which is usually tinned, allowing for a good electrical connection while maintaining adequate flex. The outer conductor is also comprised of stranded copper wire or braid material, usually aluminum or copper, depending on the type of application. The purpose of this component is to provide an overall low-resistance RF shield to the connection.Finally, the insulating material, typically thermoplastic or teflon, is used to separate the inner and outer conductors. It is responsible for preventing any “shorting” of the RF signal as it passed through the connection.ConclusionThe 5-1634503-5 Coaxial Connector is designed for use in a variety of high-frequency signal transmission applications such as antenna, radio, and data transmission. Its unique design enables it to provide a secure, low-loss connection with a high-frequency range of up to 1500MHz. Finally, the design includes an inner conductor, an outer conductor, and an insulating material to keep the two components separated and free from shorting.

The specific data is subject to PDF, and the above content is for reference