Allicdata Part #: | 50-CBSA-0.5X4.25X0.5-ND |
Manufacturer Part#: |
50-CBSA-0.5X4.25X0.5 |
Price: | $ 15.43 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 50 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 0.500" (12.70mm) X 4.250... |
DataSheet: | 50-CBSA-0.5X4.25X0.5 Datasheet/PDF |
Quantity: | 1000 |
21 +: | $ 14.02110 |
Series: | 50-CBS |
Packaging: | Bulk |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.500" (12.70mm) |
Length - Overall: | 4.250" (107.95mm) |
Width - Overall: | 0.500" (12.70mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields, typically made of metal materials, are usually used to reduce the interference between transmitting and receiving signal and to increase the system reliability. 50-CBSA-0.5X4.25X0.5 is one such type of RF shield, and it is suitable for shielding the RF signal from the interference of outside environment.This type of shield is widely used in a wide range of digital and analog electronics and communication systems. With its strong shielding effect, it can effectively reduce the interference in the system and extend the service life of the system. In addition, it is also used in signal distribution systems, mobile phone base stations, data transmission networks and other places.
The 50-CBSA-0.5X4.25X0.5 shield is made up of a shield plate, two contact points and two hinge points. The shield plate is made of aluminum alloy material, and the contact points are made of gold-plated stainless steel. The two hinge points are made of nickel-plated stainless steel. The total length of the shield is 4.25 inches, while the width is 0.5 inches.
The working principle of the 50-CBSA-0.5X4.25X0.5 shield is quite simple. In the shield, the shield plate forms a cavity into which the RF signal is passed. The two contact points are then used to connect the shield plate to the transmission line, so that the RF signal is shielded from any outside interference. As for the two hinge points, they are designed to restrict the motion of the shield plate when the shield is subjected to external force, thus allowing the shield to maintain its performance and prevent any physical damage.
The RF shield can help reduce the amount of RF interference that is received by the system. This interference is usually caused by the ambient environment, and when it reaches a certain level, will start to degrade the performance of the system. The RF shield helps to protect the system from this interference by physically blocking it and allowing the RF signal to remain in the system. In addition, the shield is also designed to help reduce the amount of RF signal leakage from the system.
The 50-CBSA-0.5X4.25X0.5 shield is designed to provide a reliable and robust solution to RF interference problems. Its use will ensure that the system is shielded from outside interference, and help to improve the reliability and life of the system in long term operation. Therefore, it is widely used in the fields of digital and analog electronics and communication systems.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...