50-CBSA-0.75X1.5X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	1.500" (38.10mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shield, also known as an RF shield box or RF can, is widely used in the radio frequency industry. It\'s an integral part of any device that generates or receives RF energy. The purpose of using such shields is to contain the RF energy that the device generates, while ensuring that external electromagnetic noise does not interfere with the operation of the device.50-CBSA-0.75X1.5X0.5 is an example of such a shield. This shield is designed to provide shielding from ambient electromagnetic interference (EMI) and radio frequency interference (RFI) up to 80 dB across a range of frequencies ranging from 25 MHz to 18 GHz. The shield is typically used in mobile radios, cell phones, base stations, and other wireless applications where RFI and EMI must be minimized. The 50-CBSA-0.75X1.5X0.5 is made of metallic perforated plates that are separated by a dielectric material. The plates are arranged in a pattern to create a mesh structure that is designed to provide maximum shielding. The mesh structure is made of small, interconnected pieces, which form an impenetrable barrier between the interior and exterior of the shield. The dielectric material helps to further improve the overall shielding effect. The main purpose of the shield is to provide a good isolation barrier between the interior and exterior of the device. The shielding effect is achieved when a signal attempts to penetrate the shield and is scattered due to the small size of the holes in the mesh. The scattered signal is also reduced in magnitude due to the dielectric material, further minimizing interference. The shield is also designed to be resilient against mechanical and environmental stresses.The 50-CBSA-0.75X1.5X0.5 shield is designed to be used in wireless communication applications, such as operation in a cell phone or base station. Its high shielding efficiency allows the device to operate reliably in environments with high levels of interference. Additionally, the shield is designed to provide protection against high voltage discharges and other transient phenomena that may occur in such environments.In conclusion, the 50-CBSA-0.75X1.5X0.5 shield provides excellent shielding from RFI and EMI up to 80 dB across the frequency range of 25 MHz to 18 GHz. It is designed to be used in wireless applications, such as mobile radios, cell phones, and base stations. Additionally, it provides excellent protection against mechanical and environmental stresses, as well as against high voltage discharges and other transient phenomena.

The specific data is subject to PDF, and the above content is for reference