500DCAC192M000ACF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators play a key role in electronic systems, providing accurate timing references for circuit operation. The 500DCAC192M000ACF is a MEMS-based VCXO oscillator that offers many advantages over non-MEMS-based solutions. This article will explore the application field and working principle of the 500DCAC192M000ACF oscillator.

As the name implies, the 500DCAC192M000ACF oscillator is designed for frequency control applications in portable consumer electronics and communication systems. These applications require a reliable frequency source with low-noise and high-performance. The 500DCAC192M000ACF is ideal for these applications as it offers excellent frequency stability and requires very low power consumption. In addition, the MEMS-based design of the 500DCAC192M000ACF results in a smaller form factor than other oscillators of the same performance level, making it ideal for in-system applications.

The 500DCAC192M000ACF oscillator is a variable-correction type oscillator, which means that it can be programmed to generate frequencies from 16MHz to 62MHz with an adjustable voltage control input. This is made possible through the use of a MEMS resonator and internal high-precision analog tuning circuitry. The MEMS resonator is a quartz-like device that operates at far higher frequencies than conventional quartz crystals. This allows the oscillator to generate output frequencies that are far more accurate than that of conventional quartz crystals.

Once the 500DCAC192M000ACF oscillator is powered up, the MEMS resonator is used to generate a “clock signal” by a process known as ringdown. In ringdown, the resonance frequency of the MEMS resonator is tuned until it is in-phase with the intended output frequency. The frequency of the signal generated by the MEMS resonator is then adjusted with the internal analog tuning circuitry and the voltage control input. The voltage control input adjusts the clock signal frequency within a range of ±100ppm, which is more than sufficient for most frequency control applications. The 500DCAC192M000ACF oscillator is designed to generate clock signals with a low jitter profile, ensuring accurate and stable operation.

In addition to frequency control, the 500DCAC192M000ACF oscillator can also be programmed to generate various signals as well as be used for temperature compensation. The oscillator can be programmed to generate various frequency responses such as sine, sawtooth, and pulse waveforms, which can then be used in various applications such as frequency synthesis, channel selection, and modulation control. It can also be used for temperature compensation by switching to a higher frequency as the temperature increases, and a lower frequency as the temperature decreases. This allows the 500DCAC192M000ACF to maintain excellent accuracy over a wider temperature range.

Overall, the 500DCAC192M000ACF oscillator is an ideal solution for frequency control applications in portable consumer electronics and communication systems. Its MEMS-based design offers excellent performance at low power consumption, and its adjustable output frequency allows it to be used in a wide variety of applications. Its ability to generate a low jitter signal also ensures that systems using the 500DCAC192M000ACF oscillator operate reliably and accurately.

The specific data is subject to PDF, and the above content is for reference