500DEAC200M000ACF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

With the rising demand for network coverage and data rate in the communication industry, the study of advanced oscillators is of great importance. 500DEAC200M000ACF oscillator is one of the advanced oscillators, which has been widely employed in industrial and commercial applications. This paper delves into 500DEAC200M000ACF application field and working principle.

Application Field

500DEAC200M000ACF oscillator is mainly used as the driving circuit for power amplifiers, and has been widely adopted in the field of radio communication and industrial and commercial applications. Because of its good linearity, power efficiency and range, it has been widely applied for signal transmission in the high frequency band. For instance, it can be utilized for frequency reference or timing signal in the microwave signal reception and digital transmission application. It is also advantageous for power consumption and heat dissipation as the driving circuit of the power amplifier.

Working Principle

The 500DEAC200M000ACF Oscillator is an integrated circuit that combines both a phase-locked loop (PLL) and a voltage control oscillator (VCO). The PLL consists of a phase detector, low pass filter, voltage controlled oscillator, and divide-by-N counter. The PLL is designed to sense the difference between an input reference signal and the output of the oscillator and apply corrective signals to ensure that the oscillator frequency is in synchronization with the reference signal. The VCO generates the output signal of the oscillator and is adapted to be frequency dependent on the corrective signals from the PLL in order to achieve the synchronization.

The 500DEAC200M000ACF has two distinct operating modes- the free-running mode and the locked mode. In the free-running mode, the oscillator runs at constant frequency and is not synchronized to any external reference. This mode is usually used in situations where frequency accuracy is not critical, such as in wireless application. In the locked mode, the oscillator is synchronized to an external signal. The external signal can be a frequency or a transition pattern, such as a square wave, and is used to control the oscillator frequency and consequently ensure synchronization.

Summary

The 500DEAC200M000ACF is among the most advanced and widely used oscillators currently available. It is mainly used as the driving circuit for power amplifiers, and has been widely employed in fields such as radio communication and industrial and commercial applications. It works by combining a phase-locked loop (PLL) and a voltage control oscillator (VCO), and can operate in two modes- free-running or locked, depending on the requirements of the application. This makes the 500DEAC200M000ACF a great choice for signal transmission in the high frequency band, power efficiency, and heat dissipation.

The specific data is subject to PDF, and the above content is for reference