500DLBB20M0000ACH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical circuits that generate a repetitive alternating or non-alternating signal. The 500DLBB20M0000ACH is an oscillator designed for ultra high frequency applications like the medium wave (MF) and high frequency (HF) broadcasting frequencies. It is a quartz crystal, air core, hybrid, low impedance device. It is capable of delivering high levels of signal to noise ratio and power efficiency, with a wide dynamic range over a broad range of frequencies.

The 500DLBB20M0000ACH oscillator utilizes a square wave form as its primary signal source. The signal is then amplified and controlled by an adjustable filter for noise reduction and power efficiency. This filter is adjustable so that, depending on the frequency of the signal being generated, the noise bandwidth, the passband and stop frequency can all be adjusted in a manner similar to that of a common low-pass filter.

The signal generated by the 500DLBB20M0000ACH oscillator is then applied to a piece of quartz crystal that is used as the resonator. Quartz is preferred for this purpose due to its extremely low temperature coefficient, which allows for more reliable and stable oscillation. The quartz crystal acts as a bandpass filter, where the frequency of the signal is determined by the length and size of the crystal. In addition, the amount of feedback from the quartz crystal to the oscillator also determines the amount of power required to sustain the oscillation.

The output of the 500DLBB20M0000ACH oscillator is then regulated with an adjustable voltage regulator. This ensures that the output of the oscillator is consistent, with minimal fluctuations in voltage or power level. The output signal is used to drive a variety of medium frequency (MF) and high frequency (HF) broadcast receivers, including FM radios, DAB radio receivers, satellite and cable TV receivers, and digital radio receivers.

The 500DLBB20M0000ACH oscillator is also designed to be resistant to electrical interference from external sources. Due to its low impedance design, noise from external sources is attenuated and filtered to reduce unwanted interference. In addition, the oscillator is designed to be highly efficient, reducing costs associated with power consumption. For these reasons, the 500DLBB20M0000ACH oscillator is an excellent choice for HF broadcast applications.

The specific data is subject to PDF, and the above content is for reference