500DSAA75M0000ACF

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	10.7mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.157" L x 0.126" W (4.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	16.5mA
Operating Temperature:	0°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	Si500D
Voltage - Supply:	1.8V
Output:	LVDS
Function:	Enable/Disable
Frequency:	75MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are a type of circuit that produces an output signal that alternates between two or more different states. Oscillators are very important components fundamental in many technologies such as audio equipment, telecommunications, medical equipment, and navigation systems. Oscillators are most commonly used to create the waveform of an audio signal, or to produce a timing signal for use in digital signal processing and control systems.In this article, we will look at the 500DSAA75M0000ACF oscillator and discuss its application field and working principle.

Application Field

The 500DSAA75M0000ACF oscillator is a stable, low-cost timing solution that is designed for applications requiring frequent output rate changes. It is a configurable oscillator that is designed for use in applications requiring a wide range of modulation rates. It can be used in telecommunications, audio equipment, medical equipment, and navigation systems, among other applications.The 500DSAA75M0000ACF oscillator\'s design is optimized for a wide range of applications. It features a low-power standby mode and a high-performance active mode, and its output frequency can be up to 10MHz. This oscillator can provide outputs with both low-jitter and low-phase noise across its range of frequencies.

Working Principle

The 500DSAA75M0000ACF oscillator is a three-terminal, dual digital-controlled oscillator (DCO) that operates on the principle of frequency modulation. The oscillator uses a frequency-modulating circuit to vary the frequency of its output signal.The input to the oscillator is a digital control input, which is typically a pulse-width-modulated (PWM) signal. This signal is used to modulate the frequency of the oscillator\'s output. The oscillator\'s output frequency is determined by the frequency of the PWM signal, and can range from 0.1kHz to 10MHz.The 500DSAA75M0000ACF oscillator also features an integrated reference clock oscillator. This oscillator provides the basic frequency for the oscillator, and ensures that the output signal is stable and accurate. The oscillator\'s reference clock oscillator is designed for low-power operation, and can be used to reduce overall system power consumption.

Conclusion

The 500DSAA75M0000ACF oscillator is a low-cost, configurable oscillator designed for use in a wide range of applications. It is a three-terminal, dual digital-controlled oscillator that uses a frequency-modulation circuit to vary the frequency of its output signal between 0.1kHz and 10MHz. The oscillator also features an integrated reference clock oscillator for low-power, stable operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description