500SABB4M91200ACH

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	10.7mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.157" L x 0.126" W (4.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	24mA
Operating Temperature:	0°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si500S
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	4.912MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 500SABB4M91200ACH Application Field and Working Principle

An oscillator is an electronic circuit used to generate a continuous stream of electrical signals in the form of oscillations. Oscillators are commonly used in computers, telecommunications equipment, and other electronic devices. Examples include the 555 timer IC oscillator, the phase-locked loop (PLL), and the quartz crystal oscillator.The 500SABB4M91200ACH oscillator is a highly-reliable, low-cost, wide-output frequency crystal oscillator. It is a single-output, square wave crystal oscillator, offering a block resistance of 50ohm. It is designed to be used in a variety of applications, including broadband telecommunications, radio broadcast, satellite communication, low-power digital switching, and more. The 500SABB4M91200ACH oscillator offers a wide selection of oscillation frequencies, ranging from 10 MHz to 1,200 MHz (12GHz). The operating voltage for the 500SABB4m91200ACH ranges from 10 to 22 volts. It is also designed to provide excellent frequency stability, phase noise, and start-up time. The working principle behind the 500SABB4M91200ACH oscillator is based on the translation of mechanical vibration of a quartz crystal into an electrical signal. The quartz crystal is sandwiched between two metal plates or electrodes. When a voltage is applied to the electrodes, the quartz crystal vibrates in its own resonant frequency. This vibration is translated into an electrical signal via the piezoelectric effect. The 500SABB4M91200ACH oscillator uses an oscillator controller integrated circuit to provide control of frequency, output voltage, and duty cycle. The output waveform of the 500SABB4M91200ACH oscillator is a square wave, which is then filtered and adjusted to provide a sine wave output. The 500SABB4M91200ACH oscillator is designed to cancel out unwanted harmonics and noise in order to provide a clean signal. The 500SABB4M91200ACH oscillator is used in a wide range of applications, from communications systems to automotive systems. In communications systems, the oscillator is used to generate carrier waves for analog and digital signals. This allows signals to be transmitted over long distances with minimal distortion. In automotive systems, the oscillator is used to control the timing of engine and transmission systems. The 500SABB4M91200ACH oscillator is a highly reliable, low-cost, wide-output frequency crystal oscillator. Its wide selection of oscillation frequencies, excellent frequency stability, and phase noise make it an ideal choice for many applications, including broadband telecommunications, radio broadcast, and satellite communication.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description