500SEAB26M0000ACF

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	10.7mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.157" L x 0.126" W (4.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	22mA
Operating Temperature:	0°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	Si500S
Voltage - Supply:	2.5V
Output:	CMOS
Function:	Enable/Disable
Frequency:	26MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 500SEAB26M0000ACF OscillatorsOscillators are electronic circuits that generate repetitive signals, usually with a wide range of frequencies. For example, the 500SEAB26M0000ACF oscillator is an electrical oscillator which creates a stable sinusoidal output signal. It is used for a variety of applications, such as frequency synthesizers, testing equipment, electrical power supplies, and medical equipment.Application FieldThe 500SEAB26M0000ACF oscillator is generally used in frequency synthesis and time-related electronic systems, such as timers, watches, computers, and digital thermometers. It is a reliable and cost-effective solution for frequency generation, which is very important in a variety of commercial and industrial applications. In medical equipment, oscillators are often used to generate a continuous signal with a stable frequency as needed for medical imaging and other diagnostics. This oscillator is also suitable for use in electrocardiograms and other medical monitoring systems.The 500SEAB26M0000ACF oscillator is widely used in communication systems such as mobile telephone networks, satellite communications, and radio equipment. It is also used in consumer products such as cameras, game consoles, and audio systems. Working PrincipleThe 500SEAB26M0000ACF oscillator is a voltage-controlled device which uses a variable-frequency oscillator circuit to generate a continuous sinusoidal signal. The oscillator works by altering the voltage applied to a capacitor, which is then discharged through a resistor. The resistor and the capacitor form an oscillator circuit where the frequency of the signal is determined by the ratio of the resistor and capacitor.When the oscillator is switched on, the capacitor initially charges up to the voltage applied by the voltage source. As the capacitor charges, the frequency of the oscillator increases. When the capacitor is completely charged, the output signal is a sinusoid with a high frequency. As the capacitor discharges, the frequency of the oscillator decreases until it reaches its lowest frequency. This low frequency is determined by the ratio of the resistor and capacitor. The frequency then begins to increase until the capacitor is completely discharged and the cycle begins again.ConclusionThe 500SEAB26M0000ACF oscillator is a reliable and cost-efficient solution for frequency generation. It is used in a variety of applications, such as frequency synthesis, timer circuits, medical equipment, communication systems, and consumer electronics. This oscillator uses a variable-frequency oscillator circuit which works by varying the voltage applied to a capacitor. As the capacitor charges and discharges, the frequency of the oscillator increases and decreases accordingly.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description