500SEBA-ACH

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	10.7mA
Height:	0.035" (0.90mm)
Size / Dimension:	0.157" L x 0.126" W (4.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	22mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	0°C ~ 85°C
Frequency Stability (Total):	±250ppm
Series:	Si500S
Voltage - Supply:	2.5V
Output:	CMOS
Function:	Enable/Disable
Available Frequency Range:	900kHz ~ 200MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable oscillators are electronic circuits used to generate electrical signals of a specific frequency that can be chosen by the user. They are usually used in communications systems, radio broadcasting, and navigation applications to ensure that the signals sent and received by the system are of the correct frequency. One of the most advanced forms of programmable oscillators is the 500SEBA-ACH, which combines the features of a programmable oscillator with those of an amplifier to maximize signal quality.The 500SEBA-ACH programmable oscillator works on the principle of using an amplifier to increase the amplitude of a signal. It also works with a feedback loop to control the frequency of the oscillations. This system uses a power amplifier with an internal compensation capacitor to control the output frequency. The amplifier is connected to the output terminals with a feedback line and is set to the desired oscillation frequency.The output of the 500SEBA-ACH is connected to the input terminal and the feedback line. The same principle applies for both the input and output terminals. When the oscillator is turned on, the amplifier amplifies the signal from the input terminal, which is then sent to the output terminals. The feedback line monitors the signal on the output terminals, and it adjusts the gain of the amplifier so that the frequency of the oscillation stays consistent.The 500SEBA-ACH also has many applications in communications systems, radio broadcasting, navigation, and other applications. It is used to ensure the signals sent and received by the system are of the correct frequency and that the signal quality is maximized. Additionally, it is used as a component in various electronic systems to buffer signals, amplify signals, and synchronize signals.The 500SEBA-ACH is a highly reliable programmable oscillator that can be used in many different applications. It is a cost-effective way to ensure that the signals sent and received are of the correct frequency and that the signal quality is optimized. Not only does the 500SEBA-ACH provide an efficient and reliable way to generate the needed signal, but it also helps to reduce the system’s power consumption and size.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description