DC Resistance (DCR):	3.7 Ohm Max
Height - Seated (Max):	0.230" (5.84mm)
Size / Dimension:	0.520" L x 0.250" W (13.21mm x 6.35mm)
Supplier Device Package:	--
Package / Case:	2-SMD
Mounting Type:	Surface Mount
Inductance Frequency - Test:	2.5MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	10.5MHz
Q @ Freq:	55 @ 2.5MHz
Series:	5022R
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	302mA
Tolerance:	±2%
Inductance:	75µH
Material - Core:	Iron
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A fixed inductor, such as the 5022R-753G, is an electronic component whose purpose is to pass current through a single loop of wire—its coil—and offer an electrical/magnetic resistance to the current. It belongs to a larger group of electromagnetic components called inductors. The 5022R-753G is suitable for applications in which DC current and low to medium frequency AC current must be handled with good efficiency.

Details of 5022R-753G

The 5022R-753G has a range of specifications including close tolerances, a maximum DC current rating of 0.930 amps, an impedance of 0.753 ohms, an inductance of 0.50 H, and a DC resistance of 0.61 ohms. The coil winding is comprised of 7 turns of 30 AWG and the component\'s overall size is0.31” square. This inductor is rated for operation in frequency ranges up to 300 kHz at temperatures up to +135°C.

Application Fields of 5022R-753G

The 5022R-753G is a suitable choice for applications such as electromechanical motion control, audible frequency range filters, high efficiency energy converters, switching power supplies, and radio frequency (RF)/audio signal amplification. This inductor is most often employed in circuits in which resonance and the transfer of high frequencies is a factor.

Working Principles

An inductor, when connected to a power source, operates on the principles of self-induction and electromagnetic induction. Self-induction occurs when current passes through the inductor’s coil which acts as a kind of short-circuit, creating a magnetic field. This magnetic field, in turn, induces a voltage drop in the coil which then opposes the original current. This opposing force is known as the inductive reactance and it slows the current, or impedance, creating a voltage ripple on the wave.Fixed inductors that are suitable for low level DC current must also be effective in dissipating heat. Heat is created due to the current flowing through the component’s windings and core resistance. The 5022R-753G is designed to dissipate heat effectively using proprietary encapsulation to ensure that the inductor has the capacity for maximum current handling while maintaining stability.

Conclusion

The 5022R-753G is a fixed inductor that is suitable for use in a wide range of applications requiring close tolerances and good efficiency when dealing with both DC and low to medium frequency AC current. It operates on the principles of self-induction and electromagnetic induction to create an inductive reactance in the coil, thus slowing the current. The 5022R-753G is also capable of dissipating heat effectively using proprietary encapsulation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description