50295-5080E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane Connectors - Specialized are designed for the specific demands of certain applications. As a subtype of backplane connectors, the 50295-5080e has been specially developed for applications where high-isolation, extremely thin connection point requirements, or robustness are desired. This type of connector works similarly to other types of backplane connectors, but has characteristics which qualify them as “specialized.”

The main purpose of the 50295-5080e is to create a connection between two components separated by a distance. This connection can provide either power, signal, or both, all depending on the application. The connector is typically made of a material like polyester, parylene, or teflon, which provide electrical and chemical isolation between the components.

When using the 50295-5080e, the side of the connector with the contacts must be connected to an appropriate high-level power or signal source. This can be done either with the use of soldering or an adaptor, depending on the application. Once the connection has been made, the connection point must be insulated to create electrical isolation between the components. Any type of insulation that is capable of blocking the electrical fields between the two components should be used.

Once the electrical connection has been made, the 50295-5080e must be secured into the appropriate slots. Depending on the application, the connectors may be used with crimp or pin configuration or they may be held in place by a clamp or rubberized restrainer. After the connectors have been secured into their respective slots, they must be properly aligned so that the slot in the center matches up with the center of the connection point.

Once the 50295-5080e is properly aligned and secured, it is then ready to provide connection between the two components. The connector will provide power or signal flow between the two points depending on the application. This is done by using the pins and slots on the connector to create a bridge between the components. By utilizing this connection, the two components can become part of a larger system.

The 50295-5080e requires very little maintenance and is a reasonably reliable option for applications that require very thin connection points or for those that require robustness. It is important to properly install the connector before use, but with proper installation and maintenance, it should provide reliable service for years to come.

The specific data is subject to PDF, and the above content is for reference