510-83-180-15-002101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs, Transistors

The 510-83-180-15-002101 application is a well-known component of many electronic devices. It’s a socket for ICs and transistors and is used by both amateur and professional electronics engineers. It’s often used to reduce the amount of wiring required for a certain design, as with transistors the contacts inside the socket are basically shorted together when the chip is inserted; this makes multiple transistor connections much simpler for the user.

The socket itself consists of a base and two plastic covers. These covers are used to keep the part pins in place and also to keep them from shorting out with other components. It has two different sized pins, one for each type of transistor or IC, and two small plastic clips on the side to hold the chip into the socket once it’s inserted. Sometimes the clip is also used to provide a physical stop to prevent the chip from dropping too far into the socket.

The 510-83-180-15-002101 receives its power from two interconnecting cable strips on the base. There are two small silver-plated contacts on the bottom of the socket that make contact with these strips when the chip is inserted. These silver-plated contacts increase the amount of current that can be supplied to the chip as compared to other types of pins/sockets. This is important because many transistors and ICs require much more current than their packages will allow them to draw through just one type of connection.

The design of the 510-83-180-15-002101 is straightforward and simple, with the only major design element being the two plastic covers which protect the component’s pins. This design is used in many areas as it is suitable for low cost projects, and so is often used by students and hobbyists as well as technicians and engineers.

When selecting a 510-83-180-15-002101, the user should make sure to get one with a compatible voltage rating to the component. The plastic covers should also be checked for any defects that could cause the pins to short out when inserted, as this could damage the component or even the device that the component is installed in. Additionally, the user should also make sure to get a socket with the correct pin pitch for the component, as different devices use a different number of pins with differentpinpitches.

In conclusion, the 510-83-180-15-002101 is a socket for transistors and ICs that is used by both professionals and hobbyists. Its simple design and low cost make it popular for use in low cost projects, while its two silver-plated contacts provide a reliable, high current connection for these components. When selecting one, the user should make sure to get one with the correct voltage rating for the component and the correct pin pitch.

The specific data is subject to PDF, and the above content is for reference