510FCA100M000AAG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	23mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si510
Voltage - Supply:	2.5V
Output:	LVDS
Function:	Enable/Disable
Frequency:	100MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction to Oscillators

An oscillator is an electronic circuit or device that produces alternating current (AC) or a repetitive signal at a predetermined frequency. Oscillators are commonly used in electronics and in other applications such as radio communication, television, sound reproduction, sound synthesis, and computer graphics. Oscillators have many different applications, including frequency generation, clock and timing signals, clock control, data transmission, signal regeneration, modulation and demodulation, power control, and pulse generation.

Types of Oscillators

Oscillators can be divided into two major categories based on the type of waveform they generate: sinusoidal oscillators and non-sinusoidal oscillators. Sinusoidal oscillators produce a continuous output signal with a sinusoidal waveform. These types of oscillators are typically used to generate precise frequencies for accurate timing and data transmission applications. Non-sinusoidal oscillators, on the other hand, generate a variety of waveforms including square waves, triangular waves, and sawtooth waves. These types of oscillators are typically used for sound synthesis and sound reproduction.

510FCA100M000AAG Application Field and Working Principle

The 510FCA100M000AAG is a tuned oscillator designed specifically for frequency generation and clock and timing signal applications. It is a sinusoidal oscillator that generates a continuous output signal with a sine waveform of 0.02 V peak-to-peak amplitude. It is capable of generating frequencies from 1 KHz to 5 MHz.The 510FCA100M000AAG consists of two transistors (each containing an N-channel JFET), one capacitor, one resistor, and two diodes. The capacitor and the resistor function as an LC (inductance-capacitance) resonator which forms a frequency selective feedback circuit. When a DC voltage is applied to the oscillator, the transistor amplifies the voltage to drive the capacitor and the resistor. This produces a signal at the output that is modulated by the LC resonator, and the output frequency is determined by the resonance frequency of the LC resonator. The oscillator is tuned to the desired frequency by adjusting the value of the capacitor or the resistor.

Conclusion

Oscillators are an essential component of many electronic circuits and devices, and there are many different types, with various applications and working principles. The 510FCA100M000AAG is a tuned oscillator designed specifically for frequency generation and clock and timing signal applications. This oscillator is designed to produce a continuous sine wave output with a peak-to-peak amplitude of 0.02 V, and it can generate frequencies from 1 KHz to 5 MHz. It consists of two transistors, one capacitor, one resistor, and two diodes which form an LC (inductance-capacitance) resonator which functions as a frequency selective feedback circuit. The frequency of the oscillator is determined by the resonance frequency of the LC resonator and it is tuned to the desired frequency by adjusting the value of the capacitor or the resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description