510LCA-BAAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are electronic circuits that generate a periodic waveform of predetermined frequency. The ability to accurately reproduce a known waveform or pattern is important in many applications, such as the generation of radio signals, the production of electrical test signals for the calibration of instrumentation, and the generation of control signals for communication networks. One type of programmable oscillator is the 510LCA-BAAG. This oscillator is used in a variety of applications and has a number of advantages over other oscillator types.

The 510LCA-BAAG is a low-cost, low-power, single-frequency, programmable oscillator that offers versatile control over the frequency, waveform and modulation characteristics of the output waveform. It has an extended frequency range of 1.8Hz to 4.0MHz, and is designed to operate within a -25°C to +100°C temperature range. The output waveform can be programmed to any of the following: pulse, square, sinewave, or sawtooth waveforms. An external modulation signal can be used to modulate the frequency, amplitude, or waveform of the output signal. The modulation characteristics can be programmed for frequency, amplitude, or pulse-width of the output waveform.

The 510LCA-BAAG oscillator has a number of applications. For example, it can be used as a frequency generator for testing and tuning audio or radio frequency devices, as well as systems such as radios, TVs, and radar. It can also be used in communications, such as signal generation for short-range data transmission. In addition, the oscillator can be used as an analog signal source, such as for vibration or motion control. It is also used in applications such as motor control, where precise timing and synchronization of signals is required.

The 510LCA-BAAG oscillator has a number of features that make it attractive for many applications. It has a low operating voltage of 3 V and low current consumption, which makes it well suited for battery operated or portable applications. The device is also highly compact, with a footprint of just 4 mm x 4 mm and a height of 1 mm. Its low-power operation, combined with its wide operating temperature range, makes it ideal for embedded applications such as automotive electronics, industrial control and consumer electronics.

The 510LCA-BAAG oscillator is based on a Programmable Oscillator IC, which is programmed by supplying a numeric code to the IC. The numeric code is a combination of analog values, which are used to set the operating parameters of the oscillator including the frequency, waveform, and modulation characteristics. The parameters can then be adjusted and verified using the on-chip calibration feature. The oscillator also has a built-in event trigger to allow for synchronization of the waveform output.

In summary, the 510LCA-BAAG is a low-cost, low-power, single-frequency, programmable oscillator. It offers a wide range of frequency, waveform and modulation characteristics, making it suitable for a variety of applications. It has a low operating voltage and low current consumption, making it ideal for embedded applications. The device is highly compact, with a 4 mm x 4 mm footprint, and has a built-in event trigger making it suitable for synchronization applications. It is programmed by supplying a numeric code, which can be adjusted and verified using the on-chip calibration feature. Therefore, the 510LCA-BAAG is an ideal choice for many applications, and can provide a cost effective and reliable source of a precise waveform.

The specific data is subject to PDF, and the above content is for reference