511FCB100M000AAG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	23mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si511
Voltage - Supply:	2.5V
Output:	LVDS
Function:	Enable/Disable
Frequency:	100MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

Oscillators are circuits which produce a periodic waveform usually of a sinusoidal nature. They are widely used in many applications that require an output signal to be generated or refined over time. Oscillators are fundamental devices in the field of electronics as they act as control systems to stabilize the output of a circuit. An oscillator produces a signal of a frequency determined by its components and usually is associated with a stabilizing electronic element such as a capacitor or inductor.The 511FCB100M000AAG oscillator is a specialized type of oscillator. It is designed to work in applications where a waveform needs to be accurately generated and/or monitored and measured. It can work in a wide range of oscillator applications including alarm systems, embedded systems, security systems, and motor controllers.

511FCB100M000AAG Application Field and Working Principle

The 511FCB100M000AAG oscillator device is commonly used in industrial and consumer applications where a reliable and stable source of frequency is needed. It is often used for communication and digital signal processing systems. The device works by employing a feedback mechanism which ensures that the output signal is accurately produced.The device consists of a ceramic resonator and a monolithic oscillator circuit. The output frequency of the device is determined by the resonator, the oscillator circuit and the oscillator control signal applied to it. It is designed to have a flat frequency response with very low sidebands and an optimized frequency optimized power spectral density.The device works in a specific way to produce an accurate and stable output frequency. First, the signal is sent to the ceramic resonator which is used to control the output frequency. Next, the oscillator circuit uses the control signal to detect changes in the output amplitude and adjust the oscillator frequency accordingly. Finally, the device will output the resultant signal which is the desired frequency output.The 511FCB100M000AAG oscillator is typically used in low noise and low power applications due to its ability to accurately generate frequencies in the range of 1 kHz to 100 MHz. It is designed to be robust and reliable and can operate in a wide range of environmental conditions.

Conclusion

The 511FCB100M000AAG oscillator device is commonly used in industrial and consumer applications where a reliable and stable source of frequency is needed. It works by employing a feedback mechanism which ensures that the output signal is accurately produced. The device consists of a ceramic resonator and a monolithic oscillator circuit, and is designed to have a flat frequency response with very low sidebands and an optimized frequency optimized power spectral density. It is typically used in low noise and low power applications and is designed to be robust and reliable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description