515CCA25M0000AAGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical components meant to convert a direct current (DC) voltage into an alternating current (AC) voltage of a specific frequency. The 515CCA25M0000AAGR oscillator is one particular type. It is a miniature surface mount device that is especially designed to have extremely low jitter and a high level of accuracy for their frequency output. This type of oscillator, as well as its many applications, is discussed in greater detail below.

515CCA25M0000AAGR Features and Applications

The 515CCA25M0000AAGR is an all-in-one quartz oscillator module. It is constructed using a startable 3rd overtone crystal in order to attain excellent frequencies up to 125MHz. The crystal is held in place by gold electrodes, and a thermistor helps with temperature compensation. Moreover, the oscillator is equipped with protection circuitry which prevents it from being destroyed due to abnormal electrical applications.

The 515CCA25M0000AAGR is ideal for applications requiring low jitter and stability. Its frequency range lies between 2.01MHz and 125MHz and its typical output power is 1.6Vpp. It also has a good control capability due to its tight control range of ±3 ppm (-40°C to 85°C). Other characteristics of the oscillator include a maximum total current of 6mA and an operating temperature range of -20°C to 70°C.

Among the most common applications the 515CCA25M0000AAGR is used for include networking, automotive, medical, consumer electronics, military, radio and communications, as well as industrial equipment. Its ability to operate over a wide temperature range and its exceptionalstability make it suitable for a variety of electromagnetic compatibility applications beyond those already mentioned.

515CCA25M0000AAGR Working Principle

At the heart of the 515CCA25M0000AAGR oscillator is its quartz crystal. Quartz crystal resonators are used to generate a signal due to their accurate frequency characteristics. They do this by receiving an electrical input signal, which is then modified within the crystal. The modified signal is then passed back to the input, where it is again processed and modified, and so on. As this cycle continues, the oscillations increase in size and in frequency, and a sinusoidal signal of specific frequency is then generated and sent out. The crystal is usually very small, and is typically positioned at the centre of the oscillator.

Another component of the oscillator is the temperature-compensating device, such as a thermistor. This is used to compensate for temperature changes, as the temperature of the crystal affects its resonant frequency. The thermistor detects temperature changes, which are used to modify the response of the oscillator to keep the frequency stable.

In addition, the oscillator also contains a voltage-controlled amplifier, used to control the output amplitude of the signal. This is important in applications where a specific signal amplitude is required. The amplifier works by amplifying the radio frequency (RF) signal coming from the crystal. The output signal can then be controlled by the amplitude of the DC voltage applied to the amplifier.

Conclusion

The 515CCA25M0000AAGR is a miniature, quartz-based oscillator designed to provide low jitter, accuracy, and stability at frequencies up to 125MHz. It is used in a wide variety of applications, and its use is limited only by its temperature range, output power, and frequency range. It works by using a quartz crystal resonator to generate the output signal, and a thermistor to compensate for temperature changes. Finally, the output signal can be controlled using a voltage-controlled amplifier.

The specific data is subject to PDF, and the above content is for reference