520R20DA16M3690

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits which produce oscillating waveforms. They are used in a variety of applications including radio receivers, amplifiers, oscilloscopes, computers, communication networks, and embedded systems.

The 520R2O DA16M3690 oscillator is a high frequency transformer–based oscillator. It can be used for many different applications, including RF transmitter circuits and FM receivers. It requires a voltage supply of 10 -30 V DC, and has an operating temperature range of -40 to +85°C.

Working Principle

The 520R2O DA16M3690 oscillator operates on the principle of positive feedback. It consists of a transformer and an amplifier, which are connected in such a way that a portion of the output signal is fed back to the input side of the amplifier in a continuous loop. This feedback causes the amplifier to oscillate at a frequency determined by its components.

The waveform of the signal produced by the oscillator depends upon the values of the components used in the circuit and the manner in which they are connected. The amplitude of the output signal is determined by the gain of the amplifier and the amount of positive feedback. The frequency of the oscillator is determined by the components used, including the transformer windings and the capacitance of the feedback circuit.

Applications

The 520R2O DA16M3690 oscillator can be used for a wide variety of applications. It is suitable for use in radio, TV, and communications applications, as well as embedded systems and computer applications. The oscillator can be used in FM radios and receivers, as well as two-way radios, transceivers and transmitters. It is also suitable for use in test and measurement applications, such as frequency synthesizers, Frequency-Modulated (FM) oscillators, and modulators.

The 520R2O DA16M3690 oscillator is capable of operating at frequencies up to 7GHz. It is suitable for use in high-frequency and wideband applications, and can be used to generate signals with low-phase noise. The oscillator is also capable of providing low-jitter performance in clock recovery circuits.

The 520R2O DA16M3690 oscillator is a high-performance, cost-effective solution for a variety of applications requiring frequency stability and accuracy. The oscillator is available in a variety of packages, making it suitable for a range of applications where high levels of precision and accuracy are required.

The specific data is subject to PDF, and the above content is for reference