52NN-CBSA-2.75X5.75X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	5.750" (146.05mm)
Width - Overall:	2.750" (69.85mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are a unique type of shielding solution that is used to prevent the passage of radio-frequency (RF) waves within a certain area or device. These shields are designed to block the transmission of unwanted radio signals such as those caused by cellular or Wi-Fi networks. The most common solution is to use a series of metal plates or screens, such as copper or aluminum. The 52NN-CBSA-2.75X5.75X0.5 is a type of RF Shield.The 52NN-CBSA-2.75X5.75X0.5 functions by combining two metal layers around the required area of protection. The first layer to be added is a conductive film which has both electrical conductivity and reflectivity properties. This film is usually a copper foil with a thickness of around 0.5 millimeters or more. The second layer used is typically a poly-tetrafluoroethylene (PTFE) non-conductive material. The combination of the two layers works to create a shield capable of blocking radio signals from entering or exiting the designated area.The most common application field for the 52NN-CBSA-2.75X5.75X0.5 is for RF jamming applications. The shield is a great way to completely isolate and prevent any undesired radio signals from causing any issues in the desired area. This type of shield is great for situations where complete immunity is desired such as for military or security purposes. It can also be used in places where such signals are unwanted or hazardous such as in medical labs or industrial factories.Another common application for such a RF Shield is in consumer electronics. Many consumer electronics today use radio signals for a number of purposes such as to communicate with other devices, to control their performances or to connect to networks. The introduction of such a shield can help to reroute and control the signal input and output in order to prevent interference and/or improve the device’s performance. The shield can also be used to reduce the impact of outside radio signals on the device so that its performance is not affected.The 52NN-CBSA-2.75X5.75X0.5 shield is also efficient in reducing the impact of powerful electromagnetic fields from cell phones, transmission towers and other wireless devices. This can be especially beneficial if the operating device is seen to interfere with the performance of neighboring systems. The amount of energy blocked is dependent on the frequency of the signal and the distance of the shield from the emission source.In order to function correctly, this type of RF shield must be properly placed within the device’s layout. It must be placed in such a way that the protected side is isolated from the radio waves emitted from the source. The shielded side must also be free from obstructions that could impair its shielding effect. The combination of the two layers should also be consistently checked to ensure their protective effectiveness.The 52NN-CBSA-2.75X5.75X0.5 can be a great solution for providing protection against unwanted radio waves in a desired area or device. When appropriately implemented, it is effective in preventing radio frequency interference and protecting against any potential harm from high-powered RF sources. Its effectiveness can be further increased when it is combined with other shielding techniques and with proper placement. All of these measures can help to ensure maximum performance and reliability of the necessary equipment and systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description