53-CBSA-3.75X4.0X0.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields refer to a broad category of devices whose primary purpose is the prevention of radio-frequency (RF) interference or interference by emitted radiation. RF Shields work by creating a barrier of conductive material or, in the case of waveguides, by creating obstructions for the transmission of RF signals. The 53-CBSA-3.75X4.0X0.5 RF Shield is an example of such a device.

The 53-CBSA-3.75X4.0X0.5 RF Shield is composed of three components: an absorptive shield, an absorptive liner, and a conductor. The absorptive shield is made of a specially developed material which absorbs most of the RF energy. The absorptive liner, which is typically placed behind the absorptive shield, is made of a material that allows some RF energy to pass through but is highly absorptive of the remaining RF energy. Finally, the conductor is placed behind the absorptive liner to provide a pathway for the RF energy which is transmitted from the absorptive shield. The combination of these three components provides a total impedance of 53 ohms.

The 53-CBSA-3.75X4.0X0.5 RF Shield is primarily used to protect electronics and other sensitive devices from unwanted RF interference. The device\'s high efficiency and low insertion loss make it ideal for applications where shielding from RF interference is required. The device also features a Class B RF shield rating, which provides additional protection against high-power RF signals. This makes it suitable for applications such as screened room isolation, laboratory isolation, and medical device isolation.

The working principle of the 53-CBSA-3.75X4.0X0.5 RF Shield is based on the principle of electromagnetic shielding. Electromagnetic shielding is the process of creating a barrier of conductive material which can block the transmission of RF energy. The barrier created by the 53-CBSA-3.75X4.0X0.5 RF Shield works by absorbing most of the RF energy and allowing only a small portion of the energy to pass through. This helps to reduce the amount of RF interference which can be transmitted into the environment or into sensitive electronic equipment. The conductor also serves to direct any remaining RF energy away from the sensitive equipment, thus further reducing the amount of RF interference.

In addition to RF shielding, the 53-CBSA-3.75X4.0X0.5 RF Shield can also be used for signal shielding. This involves creating a barrier which blocks the transmission of electromagnetic signals. The device\'s high efficiency and low insertion loss make it ideal for shielding from unwanted signals, such as those generated by cellular phones, Wi-Fi networks, or GPS receivers. This allows sensitive equipment to be located in areas which are prone to high levels of electromagnetic interference without being affected by it.

The 53-CBSA-3.75X4.0X0.5 RF Shield is an effective and reliable device for protecting electronics and other sensitive devices from RF interference. Its use of absorptive and conductive materials makes it highly efficient in blocking the transmission of RF energy and providing total impedance of 53 ohms. Its ability to also be used for signal shielding makes it suitable for applications such as screened room isolation, laboratory isolation, and medical device isolation.

The specific data is subject to PDF, and the above content is for reference