Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	88mA
Operating Temperature:	-40°C ~ 85°C
Series:	Si530
Frequency Stability:	±20ppm
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	26.6MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

530CB26M6000DGR Oscillators

Application Field

The 530CB26M6000DGR is a crystal oscillator that falls under the category of an oscillator. Oscillators allow the user to create signals of varying frequencies and have been widely used in telecoms, communications, the media, industrial applications and more. In particular, the 530CB26M6000DGR is designed for precision consumer and industrial electronics markets, incorporating a dielectric resonator to produce a stable signal in comparison to its counterparts. With a frequency of 26MHz and a frequency stability of +/- 50ppm, it is suitable for applications such as interface products, clocks and microcontrollers.

Working Principle

The 530CB26M6000DGR works to stabilize the frequency or output signal thanks to its dielectric resonator. It is a quartz crystal mounted on a MEMs chip and acts as a voltage-controlled oscillator.At its most basic, the oscillator works by having the quartz crystal, which acts as a capacitor, being in opposition to an inductor. This creates an LC circuit and so long as there is a power supply to the circuit it will reach equilibrium and then continue oscillating. The dielectric resonator, however, is more efficient as it is a capacitor within a shell of another material, such as ceramic. The material chosen for the shell can be chosen for its specific dielectric properties, allowing for greater precision in the boundary conditions of the circuits.When the oscillator is switched on, electrical signals are sent to the capacitor which start the oscillation and eventually an output signal is produced. The dielectric resonator ensures that the oscillations remain consistent and the output signal stable.

Conclusion

The 530CB26M6000DGR oscillator is designed to produce a highly consistent output signal with a 26MHz frequency and frequency stability of +/- 50ppm. The passive dielectric resonator within the oscillator ensures the frequency is highly accurate and stable and therefore making them suitable for precision consumer and industrial electronics markets.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description