531FA200M050DGR Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is an electrical circuit used to generate a signal with a specified frequency, often used in radio, communication and audio circuits. Oscillators are typically used to generate a signal voltage, either alternating current (AC) or direct current (DC). The most common type of oscillator is the voltage-controlled oscillator, or VCO, which is used in a variety of electronic devices, from mobile phones and computers to testing and measurement equipment.

The 531FA200M050DGR is a voltage-controlled oscillator designed for applications in the field of communications, radio technology, and medical electronics. It is especially suited for applications where low noise, low power consumption, and wide frequency range are required.

The 531FA200M050DGR has a frequency range of 200 to 500 MHz, a maximum output power of 6 dBm, and a typical RMS phase noise of -128 dBc/Hz at 100 kHz offsets up to 400 MHz. Its low phase noise performance makes it well-suited for use in high-precision phase noise measurements. It also offers ultralow power (<1W) consumption and fast cycle times. With a very low intrinsic jitter, a dynamic range of 78 dBc/Hz, and a low THD for higher frequencies, the 531FA200M050DGR is an excellent solution for a wide range of oscillator applications.

The 531FA200M050DGR employs a voltage-controlled oscillator (VCO) configuration for frequency control. The VCO consists of a feedback oscillator circuit where the resonant frequency is determined by the resistance-capacitance network, and the voltage applied to the VCO input. The feedback network is designed to make the oscillator sensitive to the applied voltage, so that when the voltage is increased or decreased, the oscillator frequency will change accordingly.

The 531FA200M050DGR also uses an analog buffered divider to provide a reference frequency input for automatic frequency control (AFC) applications. The reference frequency is converted to a pulse-width modulated (PWM) signal, which is then applied to the VCO input. The VCO then adjusts its frequency to follow the reference frequency.

The 531FA200M050DGR’s analog-controlled oscillator enables it to accurately track low frequency signals, such as the reference frequency provided by the analog buffered divider. Additionally, it allows for rapid frequency control with minimal noise and power consumption.

In summary, the 531FA200M050DGR is a high performance voltage-controlled oscillator designed for use in the communications, radio technology, and medical electronics industries. Its wide frequency range, low power consumption, and low phase noise performance make it well suited for a variety of applications where fast, precise frequency control is needed.

The specific data is subject to PDF, and the above content is for reference