534BA002395DG

Function:	Enable/Disable
Current - Supply (Disable) (Max):	75mA
Package / Case:	8-SMD, No Lead
Height:	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Current - Supply (Max):	98mA
Operating Temperature:	-40°C ~ 85°C
Frequency Stability:	±50ppm
Voltage - Supply:	3.3V
Output:	LVDS
Series:	Si534
Frequency - Output 4:	161.132813MHz
Frequency - Output 3:	156.25MHz
Frequency - Output 2:	155.52MHz
Frequency - Output 1:	125MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are devices that are used to generate accurate and stable frequencies. These devices typically come with a selectable range of output frequencies which can be adjusted on the basis of user’s requirement by using a few control pins, like frequency select pin and output enable pin. This type of oscillators can be easily configured by using the appropriate control pins so that the device can be reused for different applications with different output frequencies.The 534BA002395DG is a Pin Configurable/Selectable Oscillator device. This device comes with a range of output frequencies ranging from 3.2MHz up to 32MHz. It has four control pins, Frequency Select pin (FS), Duty Cycle Select pin (DCS), Output Enable pin (OE) and Status pin (ST). The FS pin is used to set the output frequency range and the DCS pin is used to select the duty cycle of the output frequency. The OE pin is used to enable/disable the output signal, while the ST pin is used to monitor the status of the oscillator.The 534BA002395DG is mainly used in the field of clocking and timing applications. It is commonly used in the fields of communications, embedded systems, computer peripherals, consumer electronics etc. This oscillator can be used to generate a stable frequency signal with a low jitter and low frequency drift. It can also be used to control the speed of microcontrollers, which requires a precise and stable signal.The working principle of the 534BA002395DG oscillator is quite simple. When the power is turned on, the device starts functioning and the FS pin is used to select the output frequency that is required by the user. Moreover, the DCS pin is used to set the duty cycle of the output frequency that is required. This enables the device to select the appropriate frequency combination based on the user’s need.Once the frequency is selected, the OE pin is used to enable/disable the output signal. When the OE pin is set to the high level, the output signal is enabled and the device starts to generate a stable frequency output. However, when the OE pin is set to the low level, the output signal is disabled and the device stops generating any output.The 534BA002395DG oscillator is a versatile device that can be used for a wide range of applications. It is easy to configure with its four control pins, and can be used to generate a stable frequency with low jitter and low frequency drift. Thus, it is an ideal device for clocking and timing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description