Allicdata Part #: | 374-1384-ND |
Manufacturer Part#: |
535-04-0-I |
Price: | $ 4.49 |
Product Category: | Isolators |
Manufacturer: | Standex-Meder Electronics |
Short Description: | OPTOCOUPLER ATEX 4KVDC |
More Detail: | Optoisolator Darlington Output 4000VDC 1 Channel |
DataSheet: | 535-04-0-I Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 4.08240 |
Input Type: | DC |
Supplier Device Package: | -- |
Package / Case: | 4-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Vce Saturation (Max): | -- |
Voltage - Forward (Vf) (Typ): | -- |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 32V |
Output Type: | Darlington |
Series: | -- |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 19.5µs, 212µs |
Current Transfer Ratio (Max): | -- |
Current Transfer Ratio (Min): | -- |
Voltage - Isolation: | 4000VDC |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are electronic devices used to transfer signals between two isolated circuits. The 535-04-0-I optoisolator is a type of optoisolator which uses a transistor and photovoltaic output in order to transfer signals.
In order to transfer the signal from one isolated circuit to another, the 535-04-0-I optoisolator uses an LED and a photoconductor as the detection and output components. The LED is used to detect the signal from the isolated circuit, which is then detected by the photoconductor, which then converts the detected signal into an electrical signal. This electrical signal is then used to turn on or off the transistor in the second isolated circuit, thus allowing it to switch from one state to another.
The 535-04-0-I optoisolator is primarily used in applications which require isolation from electrical shock. These include industrial machinery, medical equipment and various devices used in hazardous environments. It is particularly useful in applications such as pulse oximetry, which is used to measure the oxygen saturation of a patient’s blood. The 535-04-0-I optoisolator can also be used for communication between data buses, for switching applications, and for controlling the power of an isolated system.
In order to use the 535-04-0-I optoisolator, a user must first connect the LED to the input side of the optoisolator and then connect the photoconductor to the output side. The LED then emits a light which is detected by the photoconductor, which then converts it into an electrical signal. The electrical signal is then used to turn on or off the transistor, depending on the input signal.
The 535-04-0-I optoisolator is a reliable and efficient way to transfer signals between isolated circuits. It is particularly useful in applications where electrical shock must be avoided, and where communication between data buses must be reliable and efficient. It is also useful in controlling the power of an isolated system, making it an essential component in many industrial and medical applications.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...