53A-CBSA-0.75X1.75X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	1.750" (44.45mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are an essential part of any communication system. They are used to reduce the interference between the signals and the network. The 53A-CBSA-0.75X1.75X0.5 RF Shield is designed to be used in the applications where there is a need to reduce the interference between antennas, receivers, and other electromagnetic sources. The 53A-CBSA-0.75X1.75X0.5 RF Shield is also used to protect the system from external interference as well.The 53A-CBSA-0.75X1.75X0.5 RF Shield is made of a special alloy that is designed to reduce the interference between the signals and the network. The shield is built with an apertures, which are designed to reduce the reflection of the signal. Additionally, the apertures have a dielectric layer, which is designed to reduce the attenuation of the signal.The 53A-CBSA-0.75X1.75X0.5 RF Shield has a distinctive feature that makes it easy to install. The shield is designed with a specialized mounting system that allows for easy adjustment and attachment. This feature makes the 53A-CBSA-0.75X1.75X0.5 RF Shield easy to install and remove from any application.The 53A-CBSA-0.75X1.75X0.5 RF Shield is designed to work in the frequency range of 0.13 GHz to 10 GHz, which is the range of most modern systems. Additionally, the shield has a low-profile design that allows it to be installed in tight spaces. Additionally, the 53A-CBSA-0.75X1.75X0.5 RF Shield can also be used in high-intensity fields, as the shield is designed to be resistant to strong electromagnetic waves.The 53A-CBSA-0.75X1.75X0.5 RF Shield is designed to reduce the interference between the signals and the network. The shield works by redirecting the interfering energy away from the desired signals. The design of the shield also reduces the amount of signal loss that occurs between the receiver and the antenna. Additionally, the shield is designed to be resistant to strong electromagnetic waves, which allows the signal to be transmitted over long distances with a minimum amount of signal loss.The 53A-CBSA-0.75X1.75X0.5 RF Shield is designed to be used in a wide range of applications, including cellular telephone systems, radio communications systems, and other communication systems. Additionally, the shield can be used in a wide range of environments, including industrial, laboratory, and even military applications. The shield is designed to reduce the interference between the signals and the network, which allows for improved communication and signal transmission.

The specific data is subject to PDF, and the above content is for reference