53A-CBSA-1.25X3.75X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	3.750" (95.25mm)
Width - Overall:	1.250" (31.75mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields, in particular, 53A-CBSA-1.25X3.75X0.5, are widely used to provide protection against electromagnetic interference (EMI) and radio frequency interference (RFI) used in consumer electronics, computers, communications systems, medical systems, appliances and instrumentation. The 53A-CBSA-1.25X3.75X0.5 shields come in a variety of sizes and shapes, with the length and width ranging from 1.25 to 3.75 and 0.5.The RF Shield 53A-CBSA-1.25X3.75X0.5 works by providing a fixed and efficient barrier between the electronic devices and incoming EMI/RFI signals. It also protects against electrostatic discharge (ESD). This is achieved by using a physical barrier, an electrical barrier and a combination of these two. The physical barrier is typically a metal shell or metalized fabric, while the electrical barrier consists of conductive material, including copper and aluminium, or a combination of these, and a dielectric material, such as polypropylene or polyethylene.This RF Shield 53A-CBSA-1.25X3.75X0.5 can be used in a wide range of applications, including automotive, communications, consumer electronics, computers, etc. This is because it is well suited for use in high-speed data transmission systems, and it is also convenient for use in low-noise applications, such as radio frequency identification (RFID) tags.In terms of working principle, the RF Shield 53A-CBSA-1.25X3.75X0.5 consists of two primary elements: the metal enclosure and the dielectric material. The metal enclosure acts by blocking electromagnetic waves entering or leaving the RF shield, while the dielectric material absorbs and dissipates energy. The dielectric material allows the EMI/RFI waves to travel through the material, dissipating the energy, while the metal enclosure prevents the EMI/RF waves from entering or exiting the assembly.The effectiveness of this RF Shield 53A-CBSA-1.25X3.75X0.5 depends on the amount of shielding provided. The shielding can be maximized by decreasing the size of the enclosure and increasing the thickness of the dielectric material. The use of multiple layers of dielectric material can also improve the performance of the shield, as can the use of multiple layers of metal.Finally, the RF Shield 53A-CBSA-1.25X3.75X0.5 is also effective in protecting against environmental conditions such as temperature, humidity, or other forms of corrosion. The design of the shield, particularly the dielectric material, should be such that it is able to withstand a broad range of temperatures and environmental conditions.In conclusion, the RF Shield 53A-CBSA-1.25X3.75X0.5 is widely used in a wide range of applications, and is an effective barrier to EMI/RFI signals, as well as ESD. It consists of a metal enclosure and dielectric material, and its performance can be increased by decreasing its size and increasing its thickness. The performance of the shield can also be improved through the use of multiple layers of dielectric material and metal. Finally, the RF Shield 53A-CBSA-1.25X3.75X0.5 is also resistant to environmental conditions, including temperature and humidity.

The specific data is subject to PDF, and the above content is for reference