Allicdata Part #: | 55-CBSA-1.0X2.75X0.5-ND |
Manufacturer Part#: |
55-CBSA-1.0X2.75X0.5 |
Price: | $ 14.15 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 55 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.000" (25.40mm) X 2.750... |
DataSheet: | 55-CBSA-1.0X2.75X0.5 Datasheet/PDF |
Quantity: | 1000 |
23 +: | $ 12.86710 |
Series: | 50-CBS |
Packaging: | Bulk |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.500" (12.70mm) |
Length - Overall: | 2.750" (69.85mm) |
Width - Overall: | 1.000" (25.40mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields, or Radio Frequency Shields, is a type of shielding protection used to protect electronic components and circuits from electromagnetic interference (EMI) and radio frequencies (RF). RF Shields are designed to limit the amount of RF that passes through them by absorbing the electromagnetic energy or reflecting it away. They are used in circuit designs for a variety of applications including automotive, aerospace, and telecommunications. The 55-CBSA-1.0X2.75X0.5 RF shield is designed for medium- to large-scale applications where high levels of EMI protection are required.
The 55-CBSA-1.0X2.75X0.5 is a shielded box typically sized to fit standard chassis sizes. It is constructed of durable aluminum with a protective oxide coating, and provides a low impedance barrier in-between the shielded compartment and outside environment. This type of RF shield offers superior RF shielding performance, with minimal impact on the system’s signal-to-noise ratio. The shield is also designed to efficiently dissipate RF energy, thereby minimizing the chances of any interference from the shield itself.
The working principle of the 55-CBSA-1.0X2.75X0.5 RF Shield is based on two main principles: absorption and reflection. When electromagnetic waves enter the shield, the antenna or conductor within the box absorbs most of the electromagnetic energy, converting these parasitic signals into heat, which is then dissipated through the material design of the shield. In addition, any additional energy not absorbed by the antenna is reflected away from the box to reduce interference from the outside environment.
The application field of the 55-CBSA-1.0X2.75X0.5 RF shield is broad and varied. It can be used in a wide range of industrial, commercial, and military applications, such as in the aviation, telecommunications, and automotive sectors. It is also widely used in electronic medical equipment, such as MRI machines and CT scanners. On medical equipment, the shield helps prevent accidental disruption or destruction of sensitive medical data. In the automotive field, the 55-CBSA-1.0X2.75X0.5 RF Shield is effective at blocking the effects of outside RF signals on onboard electronics, such as keyless entry systems, electronic stability control systems, and on-board diagnostic systems.
In conclusion, the 55-CBSA-1.0X2.75X0.5 RF Shield offers many benefits to a variety of applications. Its durable construction and efficient functioning guarantee superior shielding performance while protecting sensitive equipment from interference. The shield absorbs and reflects sources of EMI and RF to reduce interference, protecting onboard electronics and data from potentially damaging stray signals. This RF Shield is a valuable product for any application where high levels of EMI and RF protection are required.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...